I run the procedure to close the bridge G39 password NOT erase
If ur taking of how to change the bios password...den goto bios setup and reset it...if u have forget the bios password....only by removing the c-mos battery and inserting it again the bios password can b reset..
There's only one way to do it, strip your equipment, remove cmos battery, look for G39 on the motherboard, short circuit G39 whilst powering on your equipment, assemble your equipment then it'll work just fine
It works 100%
http://majorgeeks.com/Bios_d235.html
Save, delete, and restore
your BIOS settings or
i have used this software and no that it works although
you might have to get a computer with an internet connection to download and
burn it to a disc
http://majorgeeks.com/download.php?det=5710
UBCD4Win is a bootable CD which contains
software that allows you to repair, restore, or diagnose almost any computer
problem also has a bios reset tool which can remove your password and bios
password
you will have to burn it to
a disk as an ISO then you will have to
boot from the disc
During the boot process you will see on the
screen to press a certain key to enter setup Press and hold that key during the
boot up process to enter BIOS the scroll down to advanced bios features press
enter change your first boot device to cd press escape then press f10 to save
to cmos to restart (note after you have removed your password you will have
change first boot back to your hard drive)
4,240 views
Usually answered in minutes!
×