Lecoultre 240/3 parts - Audio Players & Recorders

Try Timesavers.com, and look for Atmos material, or go to jaeger lecoultre.com, for support.

Search ebay.com or google.com search bar.

To restore the watch back to it's original condition it will be very expensive, this kind of work is usually done at the factory because it will need extensive parts replacement. My advice would be abandon the idea because of cost, but! if you feel going that route take it back to the store where you purchased it from to see if the work can be done. Some manufactures stop providing parts after a few years making it impossible to remedy the situation.

cousinsuk.com choose branded watch parts, select the brand and search. They are in England but I use them all the time, you have to go through there little signup procedure but whatever it takes, right?

Just the stem - is about a $40 repair.
If there is clockspring damage - you're looking at $75ish

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

It might be worth having the back of the watch removed to see if there is anything engraved on the movement.

You might find that cleaning the watch gets is going, although the advice of the watch repairer should be asked for on this, as it might be very worn and in need of new parts which are unlikely to be available.

If it works and there is information on the movement, you might be able to get some information on the watch from the maker. Visit their web site (www.jaeger-lecoultre.com/) and make an inquiry, giving them all the information that you have.

An interesting problem!

Good luck.

http://www.search.siemens.com/cgi-bin/search.asp?SCSconfig=WWW2SEASIEMENSCOM-SEA&q=HTS%20400%20transfer%20switch

Yes, but for an authentic Jaeger-lecoultre watch it will be very expensive.

Your question was cut off please explain your problem further Don