Manual for a Idect Q1i Twin - GE 28112EE2 Cordless Phone

Reset Your Phone

1. Press <MENU/OK> and <UP/DOWN> to select DEFAULT.
2. Press <MENU/OK>
3. Enter the 4-digit system PIN(default 0000).
4. Press <MENU/OK> to display CONFIRM?
5. Press <MENU/OK> to confirm, and the phone will be reset to its default.

Registration; Reset Your Phone - iDect Link Plus Single User ...

Hi, Am Levy And here to show where you can find the user manual for binatone idect vantage, I will give the link to where you download or use it online either is your choice. https://www.manualslib.com/manual/537701/Binatone-Idect-Freedom-Twin.html

Binatone iDECT Freedom Twin User Manual Delete All Messages In The...

Hopefully this helps...
http://safemanuals.com/brand-user-guide-instructions-owner-manual/IDECT

When registering dont forget to press and hold the paging button on the base station for around 10 seconds to put the base into registration mode. The PIN will be 0000 unless it has been changed, to reset without PIN: Hold Paging button, disconnect power (whilst holding Paging), reconnect power still holding paging button. Any further queries call the Helpline on 0845 345 9677.

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa.

There is a scan of the idect q1i manual here.

my caller id does not appear on my phone screen

go to menu registration
select base
enter pin 0000
press ok

http://www.binatonetelecom.com/resources/0000/0146/idect_v2i_ifu_master_080409.pdf