How to set tax rate

1. To change the tax rate, first press AC.
2. Then press SET % for 2 seconds.
3. Next, press TAX+, then enter the new or current tax rate.
4. Enter the rate for a single digit tax rate such as 5% as 5, a single number; if you have a fractional percentage rate, such as 5.75%, enter it just that way: the 5, then a decimal and followed by 7& 5.
5. Then press SET % and you're done!

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]

Hello,

Please find below the solution:

Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]


Printing models (except HR-8TE):

1. Have calculator in "print" mode
2. Press [CA]
3. Hold [SET/%] key for about 3 seconds
4. Input the tax rate
5. Press [TAX+]
6. Press [SET/%]

Press and hold SET button untill set appeares.
Presa TAX RATE batton, enter requred tax. Press set button.
Job done!

Hi. If you bought it new then your dealer should have set all of the system options for you so it is strange that the tax is not programmed. Normally you would only need to set the rate when your tax rate changes. Has it been calculating tax at all? Did it come from your dealer with a standard program in it?

To change the tax rate, first press AC. Then press SET % for 2 seconds. Next, press TAX+, then enter the new or current tax rate. Enter the rate for a single digit tax rate such as 5% as 5, a single number; if you have a fractional percentage rate, such as 5.75%, enter it just that way: the 5, then a decimal and followed by 7& 5. Then press SET % again and you're done! I just did it on two of the calculators and it works. Hope this helps!

I found this on the Casio site. I think yours is a printing model. If it is use the 2nd set of instrucitons. Hope it works...

Programming Tax Rate
Non-printing models (also applies to HR-8TE printing calculator):
1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]

Printing models (except HR-8TE):
1. Have calculator in “print” mode
2. Press [CA]
3. Hold [SET/%] key for about 3 seconds
4. Input the tax rate
5. Press [TAX+]
6. Press [SET/%]

1. Switch off the calculator
2. Switch it on again
3. Press and hold the tax button (set %) until the display changes
4. Enter the new tax rate
5. Press the tax button (tax +)

Any problems contact [email protected] - he emailed the solution to me and it has worked.

Pam

step 1 pess the AC button step 2 press and hold for two seconds the % button step 3 press the tax+ button step 4 input 17­.5 step 5 press the % button that should be the tax set you can check it is set correctly by pressing the AC button and then the tax+ and 17.5 should be displayed

Printing models (except HR-8TE): 1. Have calculator in ?print? mode 2. Press [CA] 3. Hold [SET/%] key for about 3 seconds 4. Input the tax rate 5. Press [TAX+] 6. Press [SET/%]