Can't transfer calls - Mitel Superset 4025 Corded Phone (mitsup4025)

press intercom button

Call transfer on Norstar phones works by:

1. Answer call
2. Press the [Feature] [7] [0] (or simply press the [Transfer] button below phone display)
3. Dial the number where you want to transfer the call
4. Stay on line if wishing to speak to the person
   
5. Press the [Rls] button to complete the transfer

• If an external call is transferred to a busy internal or network extension, or is not answered after a few rings, the call automatically rings you back.
• Note: Use Link to transfer callers to a telephone number

If your telephone doesn't have a transfer button programmed press feature *3, the button you want the transfer button to be, and enter feature 70. While on the call press the transfer button (or press feature 70) and the extension you want to transfer to.If you want a screened transfer, wait til the extension called answers,and ask if they wish to talk to the caller on the line. if they dont, pick up the caller off hold. if they want to talk to them hang up and they'll recieve the call. If you want to blind transfer, hang up after youpress transfer and dial the extension and they'll get the call without screening.

While on the call press the transfer button (above the hold key) and the extension you want to transfer to.If you want a screened transfer, wait til the extension called answers,and ask if they wish to talk to the caller on the line. if they dont, pick up the caller off hold. if they want to talk to them hang up and they'll recieve the call. If you want to blind transfer, hang up after you dial the extension and they'll get the call without screening.

To transfer calls, while on call press Conf/Trn and dial extension number. To Call forward your call to another extension there are three codes depending on what type of forwarding #601 - #604. Your guides and manuals are here
http://guides.idacomusa.com/

Use the Transfer feature to redirect a call to the appropriate person.
To use the Transfer feature to direct a call to a third party:
To return to the original call, if the transfer is incomplete:
1. Press the Transfer soft key. The other
party is on hold and a dial tone sounds.
The LCD indicator light flashes steadily.
2. Dial the DN to which the call is to be
transferred or use Personal Directory,
Redial List, or Callers List to select a
number to dial.
3. When that number rings or a person
answers, press the Transfer soft key to
connect the calling party.
If the person called is not available,
press the line (DN) key (next to the LCD
indicator) to reconnect to the original
call.

press transfer button
call the transfer extension
wait until the person picks up
tell who is calling
hang-up to finish transfer process

You can download the manual at the following link:

http://support.rca.com/doc/Device_Documents/manuals/25404RE3_manual.pdf?deviceDocId=15&navtypeid=6&pagetypeid=2&prevPageIndex=6&selectedmodel=25404RE3&selectedFamily=generic&nvty=m

Hope this helps. Please rate my advice, too.

Good luck!

press recall key plus the extension number then you can transfer the call

You are transferring calls from your cell to your landline? Need more info.

Cynthia