Tone arm rest with locking clamp audio technica at lp120

After reviewing some of these unit being sold on e-bay, I found some pictures that show the cable coming out of the bottom of the unit. I then went to this site
The most detailed Audio Technica AT LP120 USB Review and according to them, the cable is hard wired. This means the cable is not removable. If your unit does not have the rca cables coming out of the bottom of the unit, it may have been cut off.

As this seems to be a vinyl record deck, you may find more help posting the query under audio equipment or something similar

If you have replaced the cartridge then it must be the cartridge pre-amp that is faulty. If there are any other functions on the device such as CD, then it will not effect them. Unless there is crackling on any other function then the pre-amp has a problem. The pre-amp itself is generally a single IC. You can find it by following the turntable connection back to the inside of the amp. The signals will pass through the IC before being passed to the main pre-amp.

RCA LEAD IS DAMAGED, CHANGE IT.

First off, is this a Sony or an Audio Technica? There can be many mechanical issues causing this. For more information, or should you have any further questions, please visit my website at audioserviceclinic.com. You may contact me through the website. Thank you

Replace button

hi,
Do one thing adjust counterweight on the back of the arm to 1.5gm or 2gm by rotating the counterweight. It will give some more pressuer on the styles and will avoid the jerking
ok

as long as you have balanced your tonearm correctly, maybe its simply just a problem with your vinyl? could just be dust in the grooves or could be static build up, try cleaning your vinyl with an antistatic cloth to see if the sound improves.

hi,
there are not much electronic circuit for controlling the mechanism. all mecanical movements. there are only switches to sense staring and ending. remove the power and do the following

while holding the tone arm in its rest position, slowly turn the platter by hand clock wise at least 10 rotation to clear the machanism's automatic cycle.

the connect the power and press start.
ok

Hi, there is a screw that fits up underneath the clip that needs to be undone to remove the tonearm rest clip. [email protected]