My mow videoke premium tkm-370p wo concerto pro 2 mic delay what to do?

OOps, maybe the delay is there to destroy your feedback ?
Nasty solution though.
Please read the manual closely or download it from the NET.
Peace-

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience.

Tgggh

If your trying to have a PA sytem with these unit, you need to have a

separate mic mixer.


But if your trying to setup a Videoke Sing-along System , just connect

the Mic to the player Mic Input.


But if you need and feel to DIY, there is another option

and only if you can.

you need run it again, if it does not work, you should try to re-install it again, if you need some CD Keys, you can have a view on https://www.m8x.com, games gold and games items are available there, good luck to you

It depends on the amount of active ingredient you need to kill the plants in your property. The rate is dependent on the size of the plants. For a final concentration of 1/2% (plants under 6" in height - do not mow them short the day before spraying), you need 2/3 oz of Roundup Pro (not the Roundup Pro Concentrate). However, if your area has perennials that are larger (stressed or 1-2 feet tall), you might need 2% Roundup, and then you need 2 and 2/3 oz of Roundup Pro.

Please read the label for your product and identify the plants in your location to get the appropriate rate.

Many Monsanto product labels are available as PDFs here: http://www.cdms.net/LabelsMsds/LMDefault.aspx?manuf=23&t= .

Do not mow or disturb the plants for three days after spraying. You may need to apply the Roundup in 7 days to get any plants that you missed (or weren't affected by the first dose). Wait another 3 days after the second application before planting in the area.

I hope this helps.

Cindy Wells

The delay isn't the mic, it's the mixer or how you're routing signal that's causing delay. If you're using a stander mixer use 2 separate "aux.'s" one for your vocalist and 1 for yourself. OR i aux for your vocalist and you listen to final output (stereo mix)

You may need to purchase a cheap external mixer with both mic and line inputs, and use that to mix the mic with the DVD audio. In most receivers, you can only select one input at a time. The output of the mixer can then be plugged into any spare receiver input, such as AUX, CD, DVD, etc. When not using Karaoke, you can simply turn the mic input down to prevent it from interfering with the DVD signal, but will still need to have the mixer on to hear DVD's.

Hi im joe,
if the screen says no font, no picture, no song data it means all the data installed was lost. you have to send it to the nearest service center to have it reprogram.