LD335c. I moved it from one office to another. Different network. Now I get a SC990 whenever I connect the network. Works fine without the network cable connected but as soon as I plug it in a 990 pops up. It's obviously a setting but I'm lost. Any Ideas?
Check IP address sub net, ect?
Testimonial: "Yes, I checked all of those. They are exactly the same as all of the other machines in the office that are connected to the network. Very strange!! I used this machine on the other network before moving it and it worked fine."
SOURCE: Dell 3000cn Network Connection not working
First of, the ethernet must be 'on'. If dhcp available, set it to auto (or dhcp.. anyways..) and let it reboot, just in case :)
if not, try setting the IP-setting yourself. They should be somewhat similar to the settings on your local computer(s).
To add the printer to your computer, select 'Local' printer and specify 'tcp/ip' as which port its connected to. In the new window the ip to the printer should be entered. :) (at least for XP this is..)
Hope this gave you the correct solution..
SOURCE: Cannot setup/connect to Kyocera CS-2050
go to kyocera mita america online. they have all the drivers. you need the KX driver
SOURCE: Network Connection (LAN) for HP 650C
I have a HP 650C, I just bought a Parallel to USB adapter on Ebay. It can plug straight into a computer and then be shared. I also have network card on a HP 750C+ and have it connected straight to my router through an Ethernet connection and it works fine.
139 views
Usually answered in minutes!
The Gateway would not be the same...
×