Lights flash alternating between red lights and green lights

If it's an air conditioner it could mean changing or cleaning of your filter screen. On an AC unit you can have one of four typical lights..
1.. No light-no issues because it's off.
2-4 lights depends on if one solid or blinking light (either red or green) or in other senereo two staying on our simultaneously blinking. Can also alternate blinks. These are codes for HVAC technician. Sometimes if there was a surge in power you can trouble shoot only one situation-try unplugging the unit and plugging it in upside down if possible (some models allow for it) if not... Leave it unplugged for a good 5 minutes and replug it in and see if you get the lights. If not it should be good. If you do, it's time to call a technician. Hope your issue gets fixed. Be blessed...

Understanding Sony Television Blinking Codes ' Techlore

www.techlore.com/article/understanding-sony-television-blinking-codes

Now the red light blinks 5 time while watching it. Is there any way of ..... 2006 that willnot power on and the green LED is blinking 6 times. We had a service ...

Sony KDF E55A20 - 5 Flashing Read Lights - TV Forums

www.tv-forums.com/.../TV.../TV.../Sony_KDF_E55A20_-_5_Flashing_...

Mar 17, 2012 - 14 posts - ‎4 authors
We have had a Sony KDF E55A20 since January 2006 and it has been trouble free. ...The TV will switch on fine green power lights. Then after about 20 ... If I turn off and turn on the power light will flash red 5 times. Leave it off ...

Sony TV - How to troubleshoot a red or blinking light ...

? 3:36
https://www.youtube.com/watch?v=BLkyFXv2-i4
Apr 6, 2012 - Uploaded by SonyListens
Sony TV - How to troubleshoot a red or blinking light ... and power lights, these easy steps will help you determine what the... 5:17. Easiest TV repair - How to Fix Power [TV turns off, freezes, ... Get video URL at current time.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

• If the power light on the front of the system is flashing red, or alternately flashing red or green, this may indicate the PlayStation 2 system may need service. Contact Consumer Services below.

https://support.us.playstation.com/app/answers/detail/a_id/120

Hello,
the error light sequence that you are seeing is indicating a "backlight error". Most likely you have a bad inverter board -the board that powers up the back-lights behind the display panel. They might be available via ebay if you are a DIYer, or you need to call for sony service.
Good Luck!
Rich Lilja

It looks like an electrolytic cap. on the power supply. you may find that the guilty one is bulging on the top.

The Sky+ remote should automatically default to Sony TV's. Leave the batteries out for a few minutes and try again. The Code for Sony is 0000.
Or try this :-

With TV and sky box on.
Press the 'TV' button on the remote.
Hold down the 'select' and the 'red' button (of the four coloured buttons) together, until the red light on the remote blinks twice. (takes 2 seconds)
Press the 'TV' button again.
Now enter four zeros, the red light on the remote should blink twice.
Press the 'standby' button (top right).
If the TV turns off, then press 'select' and the light should blink twice again, job done.

If the TV does not turn off then press 'TV' followed by 'standby' again.
Alternate pressing 'TV' 'Standby' until the TV turns off.
When it does, finish by pressing 'Select.
Check the red light on the remote, if it blinks 3 times, then it has run out of options for 0000.

Please unplug the tv for 30 min and then plug it back to power supply and see if the lights are blinking again...




Good luck......

Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.
please post your error code