WHILE TALKING ON PHONES, IHUNG UP AND HAVE'NT BEEN ABLE TO ANSWER SINCE. I GET INCOMING RINGS, BUT UNABLE TO ANSWER ANY OF THE PHONES. UNABLE TO GET DIAL TONE.
Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
Be sure both handsets are fully charged.
One at a time, place each handset in the base. The charge/in use LED on
the base begins to flash, indicating the base is registering the handset.
Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
Press [end] and continue with the next handset.
Note:
Once both handsets are registered, it doesn’t matter which
handset is placed in the base or the charger.
When you charge the handsets, Caller
ID summary screen and the name of
the handset appears.
This can be find from uniden website.
http://www.uniden.com/pdf/DXAI4588-2om.pdf
950 views
Usually answered in minutes!
ISSUE WITH THE PHONE IS SAME AS ABOVE BUT DISPLAYS OUT OF RANGE.
new phone does not detect base
Phone rings, try to answer, phone shows connecting and then unavailable
my uniden phone wont ring when dialed
phone will ring, and leave msg
cannot dial out, msg is CONNECTING but does'nt
Want to turn incoming ring tone from off to on
×