Intercrew LED watch, model ic3905. How do I set time and date?

To change the date and time on your Steve Madden LED touchscreen watch, you will need to follow the instructions in the user manual that came with the watch. If you do not have the user manual, you may be able to find information on how to set the time and date online or by contacting Steve Madden customer support.
To set the time and date on most LED touchscreen watches, you will need to press and hold a button on the side of the watch for a few seconds until the time and date display appears. You can then use the buttons on the side of the watch to set the time and date. The specific buttons you will need to use and the sequence for setting the time and date may vary depending on the make and model of your watch.
As for the timer, you will also need to refer to the user manual for instructions on how to use it. The timer function may be accessed through the watch's main menu or by pressing a dedicated button on the side of the watch. Again, the specific steps for using the timer will depend on the make and model of your watch.
If you are unable to find the user manual or are unable to set the time and date or use the timer function, it is recommended to contact Steve Madden customer support for assistance. They will be able to provide you with specific instructions for your watch.

To set the date on your Jaga digital watch with the WR50M model number, you will need to follow the steps for setting the date on your particular watch. Every watch is different, so the specific steps will depend on the make and model of your watch.
Here are some general steps that you can follow to set the date on a digital watch:

1. Locate the stem (the button on the side of the watch) and press and hold it until the display begins to flash. This indicates that the watch is in time-setting mode.
2. Use the stem to cycle through the different settings, such as the time, day, date, and year.
3. When you reach the date setting, use the stem to adjust the value to the correct date.
4. Once you have set the date to the correct value, press the stem to exit the setting mode.

If you are unsure of how to set the date on your watch or if you are having trouble, you may want to consult the manual that came with the watch for more detailed instructions. If you do not have the manual, you may be able to find a copy online or you can try contacting Jaga customer service for assistance.

Hi,I had the same problem. Look on the side of the watch on the right, in between the two pressable buttons. There is a small black button, size of a Byro tip. Press that in for 5 secs then the date display will start to flash. Set with the lower big button then press the small button again to cycle through month, day, hour, minute.

Phew. Takes a bit of spotting.

How do I set the digital time and date in Tvg KM 468 watch

de button on the side of the watch got 3 stands:
- totally to the left is nothing
- totally to the right is set time/hours/days
- in the middle set date.

Instructions for Intercrew LED
Press A (Top Left) once
Press D (Bottom Right)
It should start flashing
Press B (Top Left) to adjust
Press D (Bottom left) to move thru time,date ect.

What make and model of watch is this?

Which Fossil do you own?

Analog Date Watch:
Date Setting

1. Pull the crown out to position 2.
2. Turn the crown either clockwise or counter-clockwise and set the date for the previous day. The direction that moves the date varies on different watch models.

Analog Automatic:
Time and Date Setting

1. Pull crown out to position 2 and rotate clockwise to set time.
2. Pull crown out to position 3; date will advance automatically. To set to required date, continue to rotate crown between positions 2 and 3.
3. Push crown back to position 1.

Analog Digital:
Time and Calendar Setting

1. Press and hold pusher A for 2 seconds to enter setting mode. Year will begin flashing.
2. Press pusher A to select year, month, date, hour, minute, second, and then exit setting mode.
3. Press pusher B to adjust digit.
4. Press and hold pusher B to adjust digit automatically.
5. If no pushers are operated for 30 seconds, setting will be returned to Normal Time Display.

These are the three most common Fossils. If yours isn't here please let me know which model you have and I'll get you the instructions.
Hope this helps.

Some TAG models have a date "quick set". Pull crown out just a wee bit to position #1. Turn counter clockwise to advance date. Pulling out the crown to position #2 stops the watch and sets the time.