Magnavox mwd7006 dvd player hookup

Subtitle setting is in the dvd setting not the tv, If the DVD would have CC it would be on the case, CC is encoded in to the tv signal

is the scart cable in correctly?
is it damaged?
maybe the scart input faulty?

Setting your DVD player to be region free is a daunting task.
The easier way to go about this is to download ANYDVD, http://www.slysoft.com/en/anydvd.html
Rip the DVD to your computer and Re-burn with the correct region code.

You need what they call an "RF Modulator". They are about 25$. Here is a link to one...

http://www.radioshack.com/product/index.jsp?productId=2103095

try these it might work

0458
447
0258

If Progressive scan is turn on the player and not on the tv it wont show a picture, or it could be your tv doesn't have progressive can, or check your AV cables, if through componet you have to make sure your tv is on the componet channel and that the colors all match and are inserted fully into the jacks.

dfghdhdfhdhdfhd

In general, you want to run red, yellow, white (composite or a/v) cables from the out of your sat box to the in of the Magnavox. Then run a 2nd set of r,y,w cables from the out of the Magnavox to the in of the TV (there may be one or several places to plug it into TV). If your sat box is an HD sat box, you probably won't get it to work with this Magnavox. This unit was jointly manufactured with Funai corp, so you will have to call 1-800-605-8610 for tech support.

4 digit code is 0458

honey and guest: connections: Red, white, and yellow composite from out of cable/sat box to in of this dvd, and then a 2nd red , white and yellow cable from out of this player to in on television. Every television calls the correct channel something different - make note of where you plug the r,y,w cables to TV -- it may be labelled video1, video 2, av1, av2, input1, ext 1, etc. Turn tv to correct input/av/source/video channel. Call 1-800-605-8610 for further assistance.