My remote control cannot work on rewind, fast forward or comerical skip. The DVD screen display SET 1.

The main unit is the SA-AK270. The entire mini-system is called the SC-AK270. The manual is available on the Panasonic support site: https://www.panasonic.com/au/support/manual-download/audio/hi-fi/sc-ak270.html . You do need to accept the Panasonic terms of use to download the manual. The check box is below the box with the Manual description and View link. The clock setting procedure is shown on page 14 (with the remote). The pictures of the remote control and main unit buttons are on pages 8-9 of the manual.

With the remote, press the Clock/Timer button until the Display is showing the time. Press Skip Back/Rewind or Skip Forward/Fast Forward within 8 seconds of pressing Clock/Timer to set the hour. Press Clock/Timer again and use the same Rewind/Fast Forward buttons to set the minutes. Note: the SC-AK270 uses a 24-hour clock.

You can also do this by starting with the Display button on the main unit. Then use the Skip Back/Rew and Skip Forward/Fast Forward buttons on either side of the Manual Eq button.

I hope this helps.

Cindy Wells

this is the issue with non original remotes, if they program they will always be missing key or needed features---search for the original remote if you want all the features.

The solution given above works. But just be aware that the remote "Idalia ZM" is talking about that you press enter + 1 on is your television remote. Fast forward, rewind and skip (both directions) worked after doing this. Thank you Idalia ZM!

Hey,

You can use your Xbox controller as a remote control to watch media.
Here are the actions for each button:

To... Press... Play or pause Note If the DVD is bookmarked, it will start playing automatically where it was stopped the last time you viewed it. START Skip back one chapter LB
or
A, then select skip back Skip forward one chapter RB
or
A, then select skip forward Fast forward RT Rewind LT Page up through a list of items. RT Page down through a list of items. LT Open the on-screen display for more advanced playback controls. X, Y

Source: http://support.xbox.com/en-us/pages/xbox-360/how-to/watch-dvds-movies.aspx

I tried the above steps, but each time when restarting the DVD player, it said 'reset' and asked for the language to be selected again. Pressing the "Fast Forward Fast Rewind Fast Forward Up Down" sequence caused the player to lock up and require powering off at the wall.
I found on another web site that there are different initial sequences. Once I use the one for Region 2, it worked fine.

I found the instructions below on another web site, but it worked for me...

• Make sure there is no disc in the player.
• Turn on the player (you can use remote control or front panel, it doesn't matter)
• Wait for "No Disc" message to appear on the TV screen.
• Press the Repeat button on remote (plain, not A-B).
• Press the correct sequence of buttons of remote according to the original region code of your player (it's on the sticker on the back panel of the player). FF = fast forward, FR = fast rewind.
• Region 2 players: FF, FR, FF, UP, DOWN
• Region 3 players: FF, PLAY, FR, UP, LEFT
• Region 4 players: FR, PLAY, DOWN, DOWN, RIGHT
• Region 5 players: FF, UP, DOWN, STOP, RIGHT
• Region 6 players: LEFT, RIGHT, RIGHT, PLAY, LEFT
• If you pressed the correct sequence, a small white number 0 will appear somewhere on the top right of the screen. The white number 0 of the same font and size as the "No Disc" message, so don't confuse with the red "not allowed" sign that would appear when you press a function that's not available.
• Turn the player off and on again, then you can pop in a DVD of any region and watch immediately.

Good luck!

There should be a rewind button on the front of the main unit (usually indicated by either REW or 2 arrows pointing to the left), this should be next to the fast forward (again indicated by either F-FWD or 2 arrows pointing to the right) as well as PLAY and STOP - for the VCR. The only thing you would need the remote for is to set the clock and/or perform setup for the DVD player as well as timer recording. Try a universal remote which will make fast forward, play, stop, record (to VHS) and rewind easier.

Hello,

After searching the best known region hack databases I have found one process for your make and model. I can not assure you that it will work 100% but it's the only known process.

Turn on the Player with no disc on the tray. The tv screen and the dvd lcd will display "No Disk"

2. Press the "Repeat" key on the Samsung remote control

3. Press the keys: "5 7 5 3 8" on the remote. Number 2 appears on the screen for a short time.

4. Press "9". Number 9 is displayed on the screen.

5. Press the "Open/close" button in the remote. The tray will open. Leave it open for a few seconds.

6. Just press the "On/off" button in the remote.

7. You now have a multi-region dvd player!!

I hope this works for you, thank you for choosing Fixya!

The codes that I have are for the LVW-1101 ( and possibly 1105). The remote responds to the JVC remote code [0623] but the individual command buttons are scrambled and need to be programmed in-unless you have the remote w/ learning):

266-play 286-TV (as source)
292-Fast Rewind 296-Cursor Rt.
301-Fast Forward 304-Record
316-1 325-7
326-Cursor/Channel Up 328-Timer
329-0 330-Menu
364-Setup 365-Select
367-Stop 368-Previous Track
369-Cursor/Channel Down 385 Commercial Skip
389-Source 390-Next Track
413-Cursor Left 416-Display
417-2 420-Open/Close
421-3 427-4
431-Top Menu 433-Navigate Menu
452-5 453-Easy Guider
454-9 455-Power
459-6 462-Tools
474-8 479-Pause/Step
500-Channel Editor

Finding the codes is not hard-just tedious.

Hello Stephendo394:
Here are some advanced codes that were found on Remote Central.com web site.
003 Menu
004 Timer Recording
010 Timer Recording
024 Shutdown
026 Shutdown
036 Skip 30 sec
039 Next Page in Menu/Next Track in Play mode
041 Previous Page in Menu/Previous Track in Play mode
043 Time Slip
053 Record
055 Play
061 Right
065 AV
070 NTSC/PAL
076 Language Right
080 Language Left
084 Source
091 Source = SD
100 Playlist View
101 AV
105 Tape Speed
106 Advanced
116 5
117 1
118 7
119 3
120 6
121 2
122 8
123 4
124 Setup
127 Picture Info
140 ?
146 Record
148 Channel Down
152 Channel Up
162 HDD Management
164 Delete
178 Record Flexi-Mode
179 Source = DVD
180 Rewind
181 Returns to Menu
182 Pause/Play
183 Rewind
184 Forward
185 DVD In/Out
187 Forward
189 Context Menu
191 Enter
192 Up
193 Return
194 Left
197 Guide
198 Info
215 ?
219 ?
229 Create Chapter
230 ?
234 Display
245 9
249 0