RCA 39" class LCD HDTV 39LB45RQ - ON Corp US, Inc Logo

Related Topics:

A
Anonymous Posted on Dec 19, 2013

Tv has a blue light to show its on but no picture or sound

Tv is getting power but we have no sound, or picture

1 Related Answer

Anonymous

  • 14553 Answers
  • Posted on May 15, 2012

SOURCE: my rca lcd tv dvd combo power light came on but im getting no picture or sound

I see so many here with no sound/nopicture issues:

ISSUES:

1. IF sound main fuse/s are good.
2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.
3. almost all these sets the troubleshooting involves checking voltages on the main power board to narrow down theproblem.
4. Be safe and if you do not know what you are doing don't open the set.

Answers to issues:

1. RE:fuses---if a blown fuse is found get a good replacement(not the genericones like Radio Shack). Many fuses are special even aside from amperage--Don'tput a higher rated amperage fuse in the set for any reason.

2. RE: power supply in set: if total dead aside from main fuse the set uses astandby power supply that runs 7/24 and a main supply (some are combined andsome not.

Here aside from checking fuses you want to examine all the filter caps on thepower/standby to see if any are puffed up or buldged up in some fashion--Iattach a photo of a good one---top should be silver metal and PERFECTLY flatand have no brown material coming out on top or bottom.

What happens in the standby area is they use caps with too low a voltage rating(saves money) which causes them to fail in a year or two---the standby runs7/24 and the heat dries out the caps and they fail.

3. Trouble shooting consists of the above and then at some point you have to buyand try a board to see if it fixes it or not.

4. Safety first--no TV set is worth getting injured or even killed over.If set is opened at least look for puffed up and bad caps like in thisphoto.5_15_2012_1_22_51_pm.jpg

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What parts might be bad if tv powers on, standby light turns blue, but still no picture or sound?

If back-light is OK, the fault will be with its T'Con board. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
0helpful
1answer

LCD Tv, no picture, no sound, power light only

What have you got? The inverter, the mainboard?

It'll be one or the other...
0helpful
1answer

Samsung B2330HD Blue Still light, no picture?

Hay Junior!
You have a power supply problem and unfortunately this repair sould be done by one who knows electronics specially tv electronics..
0helpful
1answer

My tv has power and blue lights show in the back but i get no picture or sound

I had the exact same problem,changed the Y sus board and fixed it
0helpful
1answer

Tv blue light shows That TV is on But no picture

YOU PROBABLY HAVE A PROBLEM WITH THE POWER SUPPLY BOARD. DEFECTIVE CAPACITORS.
1helpful
2answers

Hitachi 50" plasma no picture

how do i fix p50h401 blue light no picture and sound
1helpful
4answers

JVC 42 INCH PLASMA POWER LIGHT BLINKING ONLY NO PICTURE

no kidding? what is the problem so prevelant in this unit? obvious design flaw.
Not finding what you are looking for?

124 views

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...