Dehumidifiers e1 error - Danby DDR583R Dehumidifier

You get that info from the mfg or manual.

follow this steps and fix it. God bless you

E1 error code : Deshumidifier
indicates generally an issue with rh sensor on the back of the control. However, at this time we would like to gather further information relating to the application if possible.

The E1 error code indicates that the air intake filter needs to be removed and cleaned. Be sure to turn the unit OFF & unplug it before removing the filter. Never operate the unit without the filter in place. Doing so, could damage the unit.

Hope this helped you and thanks for choosing FixYa.

Code E 5 what does it mean?

E1 code for the primary humidity sensor behind right side grill. Unit MUST be unplugged from outlet. Take right side grill out, unplug sensor from wire socket and plug back. If no help, you need new sensor.

E1 code for the primary humidity sensor behind right side grill. Unit MUST be unplugged from outlet. Take right side grill out, unplug sensor from wire socket and plug back. If no help, you need new sensor.

Water bucket full or switch is depressed under the bucket, check.

was the filter dirty that will do it let it defrost and put it back on

unit has a sealed system leak call sears for tech support 1-800-905-9505 it is under warranty

I Had an E error (not an E1 error) when I was fiddling with my humidity/temp sensor on the face of the radiator fins (behind air filter).  The sensor was WET.  I dabbed it dry, let it sit all day, and re-assembled.  It works fine now.