Bizhub 363 error code c-fa16 - Konica Minolta Bizhub 363 Copier / Printer / Scanner

Self Help Product Support Konica Minolta Business Solutions Inc


try this

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

is it a network error code.
Could mean FTP TX interruption or SMTP connection rejection
check ftp settings are correct
http://www.manualslib.com/manual/421595/Konica-Minolta-Bizhub-223.html?page=63
Could mean smtp problem check settings
http://www.manualslib.com/manual/421595/Konica-Minolta-Bizhub-223.html?page=216

Sir/Mam,
#10 Transfer roller needs replacing sponge looking roller right side of the of the machine when you open to remove paper jams.

# 9 Developing unit needs replacement that the part that holds the drum and developer/toner. IF YOU YANK THIS UNIT OUT WITHOUT REMOVING THE LITTLE COVER ONE BOLT and DICONNECT THE CONNECTOR. BIG TROUBLE, going to cost a lot to repair.

#8 PAPER DUST REMOVER the device that collect paper dust yes paper does produce DUST. Just before the sponge roller

#6 IS Warning that the developer has not been replace inside the drum cartridge. SEE #9

#4 Drum need to be replaced.

Really have to watch for all of that sir/mam.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Self Help Product Support Konica Minolta Business Solutions Inc

try this

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Toner bottle failure to turn. Shut off the machine remove the toner bottle, turn on the machine with the bottle inside it, wait for the machine go thru its paces when it ask for the toner install in correctly if the knub on the bottle is damage get a new one . if this does not work get a tech to look at it either the motor is bad or worse the control board is bad$$$

reset open close side door

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

remove the toner bottle let machine thur its paces when it says install toner bottle install correctly

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

remove the toner bottle reinstall when machine ask for it.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hi!

There is 3 things you can look at!!Make sure you have the correct gateway in the machine and that you have the correct smtp server address and that the email address is valid and working.

Hope it helps!!

There is another solution but its more costly.All you have to do is to replace the parameter board of bizhub 362 with the board of 363 along with RAMs.