Change day how do i change the day on the timex men's black reef gear i-control?  i can change the date but the day never changes.  i cant find my manual that came with the watch.  thanks.

When you pull the stem out all the way (two clicks) it should set the time. Pulling the stem out one click you noticed sets the date, you turn it one way for the date and in the same postion you turn it the other way for the day. For some reason on some watches the day will stick, if that still happens you will need to turn the hands around and around until you get to the right day, then keeping in mind the 12 hour interval you are in... set the date and time. If the day still does not change then you need to return the watch if its new or send it to timex! Caution: when sending a watch to Timex sometimes they send back a different watch without asking so if its sentimental do NOT send it to Timex!! Hope this helps! have a great day!

the perpetual calendar is not changeable date. you have to bring it to Timex watch expert because they know how to set it.

http://www.timex.com/info/Product_Instruction_Guides_Downloads

There are two ways to find the user manual for your Timex watch.

1. Find your watch on the list below and click on the language link for your manual.

2. Find the 3-digit module number located on the caseback of most Timex products and click on the corresponding language link for that number in the Module Table at the bottom of the page.

Mcdevito75 here, The stem on your Timex shou;ld have two (2) positions, slip a finger nail just under the crown and gently lift to the first position, it may take a little practice to get but you will. In this first position you"ll see by turning the crown one way you can change the date (number) and turning in the other direction you can change the month or day, if so, set the day and date to one (1) day before the day and date you want. Push the stem back in and lift the stem all the way to set the time of day, now cycle thru the watches 24 hours to set the day and date you want. Your Timex is now set and will change at the proper time of around midnite. If your Timex has the month and day you may have to cycle the 24 hours to reach the correct month other than that these instructions should help.

mcdevito75 here, Your watch (Timex) may have a 2 position stem. Push the stem (winder) all the way in, NOW just lift the stem a little to it:s first position, this should allow the date, (number ) to change, change that number to the date before the date you want, NOW pull the stem out to set the hands, rotate the hands to set proper date and time.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TIMEX watch manuals.Rate me, please.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TIMEX watch manuals.Rate me, please

I have a Timex Reef Gear watch...can't find a model number anywhere. (The watch back has the 3 digit code 940, one they don't list on the Timex site).

My watch has two stems to adjust the time, day, date, etc. On mine, you turn the top stem until what you want to adjust appears in the digital window, then you pull out the stem one click to adjust.

I found another bracelet. Thank you.

Here is a link to an owners guide for a Timex reef gear. It should help with setting the alarm. Good Luck!

http://assets.timex.com/instructions/085Instr.pdf