Reset my nokia E71 security code? i have forgotten my code

Possible that the lock code is faulty or it is the wrong code. Please confirm if the code was correct or if this was forgotten then the phone must be reset.Take support from Nokai care, take estimate with consensus.

If you forget the security code means get the master reset code for that one, master unlock code is a code that completely resets your phone, removing any security locks , get the code from this site www.superunlockcodes.com/nokia-dct-master-code-service/rs12wp10, it has the best services for the master reset code for your Nokia 3120 model mobile.....I hope that it may helpful to you....

To Unlock the Nokia from the Security Lock You can use the Master Reset Code.,You can get the Master reset code at Reliable cost at
http://www.onlinegsmunlock.com/unlocking-services/rs7wp6/ and Unlock it.Check Master Reset Code for Your Brand and Model....

you can Check Master Reset Code here http://www.mobile-unlocker.com/unlocking-services/rs2wp6/ To Unlock Your mobile from the Security or Password Lock,I unlocked My Mobile using the Master Reset Code,You can Check Master Reset Code for Your model mobile in the List there....

There is only one way to reset security code on your Nokia E71 that you have to take it to mobile phone repairing shop. They got special devices to reset the code.

You can Unlock the Nokia From the Security Lock/Password Lock using the Master Reset Code,,,You can Check Master Reset Code for your Model mobile...at
http://www.mobile-unlocker.com/unlocking-services/rs2wp6/
there You can get the Master Reset Code at reliable cost..
I unlocked my Nokia 6030 From Security Lock there.

hi
menu > settings > security > change lock code > apply master code in place of lock code and press ok > enter new code what you want

e71 reset lock code-try 12345 it works for most e71

press the keey on the left side of shift key. it will change the entry into num mode. press 112 and press dial button (green phone button). It will show connecting press end call button. Now the set should be in normal mode.