Canon IR2800 error 000051-0000

Hi . That,error indicates there is a problem with the hard drive . Maybe is damaged

web search canon printer error codes

ppress additional functions, 2 and 8 then additional functions again


Go through the following to clear the error: CLEAR >
ENGIN > ERRCLR; and then turn OFF and then ON

I think, I dont have an ir2800 manual. This is an error in the fusing section, so it may come back and require some parts replaced.

Hi there,
Well you may please follow the link below to get your manual -
http://www.givemefile.net/smanuals/_xerox_and_ifis/canon/ir-2800.html

Good Luck

one of exhaust fan is faulty or loose contact.

Hi,
these is temperature related error, fixing fault.

First you need to try cancel it, follow these steps:

turn on the copier
press *
press 2
press 8
press *
select COPIER
select FUNCTION
select CLEAR
select ERR
OK
turn off and on

If these doesnt helps change fixing film assy ( heater )

Hope that helps

Hello sir; It's means waste toner bottle full, dump it after you turn off the power, then turn power back on.

Call a tech.

uninstall printer driver and then software install again.

e000007 is related to the fuser..you need to change the fixing film or clean the sensor