General error for epson stylus T10

This printer needs a service, the waste ink tanks are full. The printer needs to be opened up, and these waste ink spounges need to either be replaced or cleaned. Use disposable gloves and water to flush out the ink. Dry out the sponges in the sun, and reinstall them.

Download the Full version resetter epson stylus photo r230x [TRUSTED DOWNLOAD] from this link http://www.general-search.com/download/resetter-epson-stylus-photo-r230x

Once unziped and installed, double click the application and find the reset waste ink counter reset it. This should solve the problem.
You will be printing in no time.
Your timely rating of this soloution is much appreciated
Thanks

IF YOU HAVE RECENTLY CHANGED INK CART. OR HAVE NOT USED IN IN A WHILE THE JETS MAY NEED CLEANED. FOLLOW INSTRUCTIONS. ALSO CHECK INK CART. ARE BEING ALINED WHEN PRINTER IS TURNED ON.

Hi there

You can download this from my website.
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
Download Free
Click Link = http://www.4all2sell.com/reset-tools/sscserve.exe
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
All files on my website are only there for a limited time

Probably the waste ink tank is full.Try to do this:
First of all download http://www.mediafire.com/?hzxbdhkzxv9.Extract to your C drive. Run indoreset.bat, then follow the instructions.
After that right click AdjProg and select properties. Go to compatibility and select Windows XP.
Click OK at the bottom then right Click AdjProg and select run as administrator (if you have this
option). When working accept the agreement and go to
1. Particular adjustment mode,
2. Then waste ink pad counter,
3. Click Check
4. Tick both boxes.
5. Then initialization.
6. Then it's done.

It is your print head, not ink cartridge
It is reasonably easy to change yourself - google for Stylus C70 printer head

most problem with printers are dirt inside. if you want to experiment, try opening the printer, usually held by snaps, if accomplished clean all contacts, cables ribbon wires, then reassemble. thats easier said than done.

Hello i have a printer Epson T10. how to solved the General Error

General error : head carriage error / chip not recognized. Head carriage can't move freely. Just turn off for about 1 hour, turn on again without ink tank. Plug ink tank.

I use a bulk ink system which is not Epson so printer did not recognise the ink supply.
I 1) Turned printer off
2) Removerd bulk ink suppy tanks
3) Fitted Epson ink tanks [ dont matter empty or full ]
4) Turn on printer and let it go through it's start up prcedure
5) Do not turn printer off but do ink change procedure and refit bulk ink tanks
6) Do Nozle Check/Clean/Realignment
Bingo sorted