Classic Flame 39EB500GRS Error Message E3?

You will probably have to go shopping in China! Apart from Switches and remotes, there appear to be no parts despite there being a parts list.

https://www.google.com/search?q=Classic+Flame+36EB220-GRT+parts

..

question edited for clarity.
Question moved from Computers.

It is only 1,500 watts so it uses a standard 110 volts outlet in the USA and Canada.

Model numbers are important in these questions. If you are in the UK or South Africa, it will be 220 volts and reflected in a different model number for those markets.

https://www.electricfireplacescanada.ca/efca-products-accessories/plug-in-electric-fireplaces-ca/classicflame-26-in-3d-spectrafire-plus-infrared-electric-fireplace-insert-26ii042fgl.html

The E3 error is a Overheat situation blocked vents, fan not spinning, not enough clearance.

https://www.google.com/search?q=spectrafire+electric+fireplace+e3+code

....

If the flame effect in your fireplace continues to stay on after turning it off, it could be due to a malfunctioning control board or a faulty switch. Here are a few steps you can take to troubleshoot the issue:

1. Check the remote control: If you have a remote control for your fireplace, make sure that it is turned off and that the batteries are working properly. Sometimes a faulty remote control can cause the flame effect to remain on even when the fireplace is turned off.
2. Check the switch: If your fireplace has a manual switch, check to see if it is in the off position. If it is not, try turning it off and see if the flame effect turns off.
3. Check the control board: If the remote control and switch appear to be working correctly, the issue may be with the control board. In this case, it is best to contact a professional for repair or replacement.
4. Unplug the fireplace: If all else fails, try unplugging the fireplace for a few minutes and then plugging it back in. This may reset the controls and resolve the issue.

It's important to note that if your fireplace is gas-powered and the pilot light is still on after turning off the fireplace, you should contact a professional to inspect the unit as this could indicate a gas leak or other safety concern.

I started getting an E3 code which means overheat protection has engaged. "Unplug for 30 minutes, plug back in, and test, if it continues, contact customer service".
Mar 11, 2021

FIREPLACE INSERT E3 ERROR CODE

The power to the heater can be disengaged to prevent the heater from being accidentally or unintentionally powered on. This feature is primarily added to help prevent children from powering on the heater when it is not desired. • To engage the heater override function press and hold the HEATER ICON for 10 seconds. The symbol E3 will display and then go blank while beeping 3 times. The heater function is now locked. If the HEATER ICON is pressed again E3 will appear then fade.The Flame, Downlight and Timer functions will operate normally. Only the heater and blower are disengaged. • To unlock the heater function, press and hold the HEATER ICON for 10 seconds. The symbol E3 will display and then go blank while beeping 3 times. The heater function is now engaged.

Abnormal condition of spin-dry
• The safety switch works 3 times continuously.
The number window LED display abnormal code: "E3" and begin blinking on and off at the same time and the electric buzzer sounds to indicate a problem.

Dado

Operation =
Flashing Display Timer = Yes
Turbo =
LED Display = E1
Explanation and Checking points = Indoor unit room thermistor error - Open or Closed Circuit - Check and replace if required

Operation = Yes
Flashing Display Timer = Yes
Turbo =
LED Display = E2
Explanation and Checking points = Indoor unit pipe thermistor error - - Open or Closed Circuit - Check and replace if required


Operation =
Flashing Display Timer =
Turbo = Yes
LED Display = E3
Explanation and Checking points = Indoor unit fan motor malfunction - Check and replace if required


Operation =
Flashing Display Timer = Yes
Turbo = Yes
LED Display = E6
Explanation and Checking points = EPROM error - Check and replace PCB if required


Operation = Yes
Flashing Display Timer = Yes
Turbo = Yes
LED Display = Flashing
Explanation and Checking points = Option code error - Check and input new option code if required via wireless remote controller


Operation = Yes
Flashing Display Timer =
Turbo = Yes
LED Display =
Explanation and Checking points = Outdoor unit temperature sensor - Open or Closed Circuit - Check and replace if required

sir there is some probalm in LED change it for use

Check this link.

Dude,

E3 refers to Paper Jam :)

this may come in handy:
Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
îäíàêî, äëÿ ôóíêöèé 4 è äàëåå åñòü ïðèìå÷àíèå : òîëüêî äëÿ àçèè.
à âîò â îïèñàíèè ôóíêöèè 3 åñòü : Reset except for the
followings:
- USB serial number
- Destination setting
- Waste ink counter ...


Turn it upside down and than check.....same error code or diff.


Any help, can buzz me nytime ...


Thnks.