3s-11c installation

go to this link : http://www.vtechkids.com/download/ you should be able to find a link to download the app for it3s there

You will have to open the machine up and disconnect the old cord and install the new one.

You must install the InnoTab 3S version of Learning Lodge. If it doesn't automatically install, you can install from setup files on the VTech website. Download the manual at http://www.manualslib.com/manual/551479/Vtech-Innotab-3s-The-Wi-Fi-Learning-Tablet.html

Firstly make sure the pressure set valve is turned the right way, fully anticlockwise I think.(if it has one I could be thinking of the next model up) and that the lance nozzle is in the correct position not set to detergent or mid point between positions. If that is ok it is probably the switch at the bottom of the machine. If under warranty send it back karcher switches are not good.

The calculator is set to use compound interest for the odd period. To use simple interest, press STO then EEX.

please help me a driver for my web cam it's a micro innovations model vp-3s.thankz

-11=11(c-3)
-11=11c-33
-11+33=11c-33+33
22=11c
22/11=11c/11
2=c

I can give you all you need, but I need your engine type....2S-E, 3S-GE, 3S-GTE, 3S-FE, 5S-FE?

try to use windows xp sp2 with bootable
just make sure it is bootable.

There is no problem with your computer box, it says 3S-GT on it, thats the way toyota did them back then. same with the 3S-FE (says 3S-F on the comp. box) and 3S-GE (3S-G on comp. box.) i dont recommend removin the cat. you will get defected (or waht is equivelant to a defect where you are) due to smog and stuff like that. Turbo timer is wired to the igntion system, no problems there. and as for gauges: get a pro to install them, but there should be zero trouble.