My eye clops mini projector image is jumping - JAKKS Pacific EyeClops® Mini Projector

1,the color starts to go out, it become the white and black ,
2,then,the projector running off after only a few minutes,
it is a general issue:the inductor need to be cleaned
Use a cotton swab moistened with alcohol to clean the inductor.
the inductor (Sensing element),is near to the Color Wheel.
the industor : is a black little element,as little as a sesame seed

any questions, feel free to ask me
have a nice day!
Jerry Lampdeng Limited

Use this link to get company support:

http://www.necvisualsystems.com/SupportCenter/SupportTracker/

You tried three notebooks, but did they have the same video adapters? Try a notebook with a different video adapter. i would say your video adapter isn't good enough to put out a dual display. you might need to get a laptop with a better video card

On most laptops you have to select Function F8 to direct output to the projector or the projector and the laptop display.

There is not an available link, but you can try here:

http://jakks.com/node/560

Reconnect the cables and press Fn+F8. Restart your projector and your laptop Your external projector should show video from your computer.

replace the colorwheel. if the motor starts to go, the image will jump. try av solutions in ny. they're pretty good.

if it's an lcd, the fly-eye lens might be burnt. return it.

HI there

Firstly this ghosting image will NEVER be caused by your LCD's , so do not take them out.

Have you tried using a different cable ?

If you have and the problem still occurs , you will have to look at replacing the Mainboard.

Hi,

Have you checked ot by replacing the Lamp?Check it or check the Fly-eye lens for the same.

Viren