I want to open my screen - iiyama Computers & Internet

• Select cableless protection from the screen of setup protection selection.
• Now to connect cannon ip8720 printer to wi-fi, on the setup screen , hold the button wi-fi on your printer and keep on pressing until the power light flashes, two times in a row.
• now, on the connection through the cableless setup screen , select screen.
• The software installation list will open up in front of you . choose the software that you want to install, then click on next.
• Follow instruction on the screen, click on Ok when the setup completion dialog box opens up on the screen.
• Now follow instruction on the screen, select add printer, when then add printer screen opens up on the screen.
• Now, choose cannon ip8700 series with cannon IJ network . Now, click on Add.
• Add printer screen will open up, Click on next.

Now, the process to connect cannon ip8720 printer to wifi is complete.

How to Turn Off Split Screen on iPad Split View is enabled by default on the iPad. To utilize the feature, you can drag an app from your dock to the right or left edge of your screen to open the app on a portion of the screen. If you have multiple apps open and want to close one without turning off the Split Screen or Multitasking functions in settings, you can return to a full-screen view of a single app by dragging the edge of the app you want to remove to the edge of the screen.

If, however, by "getting rid of split screen on iPad" you mean turning the feature off completely, that's something you can do in Settings. To turn off split screen on the iPad:

• Open the Settings app on your iPad.
• Tap General.
• Select Multitasking & Dock.
• Toggle off Allow Multiple Apps.

How to Get Rid of Split Screen in Safari on iPad Using split screen in Safari on iPad was a new multitasking feature for iOS 10 that continues in iOS 12. This allows you to open two separate Safari web pages simultaneously on your iPad. To start, open Safari on the iPad. You can then open a second Safari tab in split screen in one of four ways:

• Tap and hold a link; select Open in Split View.
• Tap Command+N on an external hardware keyboard to invoke Split View.
• Drag a tab from its space to either the left or right side of the screen to open it in split screen.
• Tap and hold the icon that opens your tabs view in Safari. It looks like two overlapping squares. When you tap and hold, options will pop-up. Select Open Split View.

But what if you want to get rid of split screen in Safari? What if you're done using the two tabs-how do you turn split screen on the iPad off? To close split screen in Safari on your iPad, you can do one of the following things:

• Drag the tab(s) from one of the screens to the other. Once the last tab has been dragged to the opposite side, Safari will return to full screen, which will turn off split screen.
• Or, you can tap and hold the tabs icon, which looks like two overlapping squares. Then select Merge All Tabs. This will merge all your Safari tabs back into a single window, which gets rid of split screen.

All you need is open your phone and locate the touch screen connection that connected on your screen, then remove it carefully and clean it and insert again, then open your phone,,,
if nothing's happen, you will now have to buy a new screen to replace it

Please try this link:
http://www.howardforums.com/showthread.php/1765029-How-To-Unlock-Samsung-GT-B5512-By-Unlock-Code-To-Work-With-Any-GSM-Network

Hello lknylandc, Usually to set the opening size of the Internet Explorer once opened you drag the upper left corner of the page in the upper left corner of the screen , and the bottom right in the bottom right of your screen. once this is done you close Internet Explorer at the next opening it should normally open the size it had when you closed it
Hope this helped Pierre

hi. you have to hold the open button while the screen goes down.

your flex cable is either bad or going bad...you need to have it replaced at a qualified phone repair shop.or your screen might be going...my first guess would be the flex cable

sam !

Iris is not the cause of black screen.First confirm that shutter is opening as soon as you switch on camera.If shutter is not opened and you can't see live view on screen except black screen,then certainly there is problem with shutter assambly.

If shutter opens and you see black screen then there is problem with CCD.
.

Well what sometimes happens is your phone gets confused because when your cell phone is shut the screen doesnt go dark it is a plan white screen so what I think happend to your phone is that the sensor that is on your keypad is messed up somehow and thinks it is open when its shut.
The same thing happened to me before but my phone got wet.

you can open the screen cover of your v3. if you have screws drivers thats fits the screws you can open it.
to open it, at the screen of your v3, theirs a 4 little rubbers. remove the rubber (be sure to secure it cause when it drops you have a hardtime finding it) and beneath it are the screws. after talking it off, you can now open the screen. just locate the clips to separate the screen.
no need to open the other side only the screen part...