Lg lfc23760st /04

When you took the i/m out, the motor has put the door out of synch

No need to buy a new main control board !
The problem is mainly from the fuse that soldered in the main control board, go to buy a "125V 15A or 250V 15A" fuse ($5.00 a pack of 5 pcs), cut the burnt fuse from the board, re-soldered the new fuse into the board, the refrigerator work again. you save $80 for the labour cost of the technician and $180 for the cost of a new main board.

Sounds like a hole in water line. Shouldnt be too much to fix. Hardst part is finding the hole

Go back where you bought it and let them ex-change it for you.

slow

LG LFC23760ST
I recorded a 2 part movie clip on how I repaired the blown fuses on my LG refrig's circuit board.

">

The making of ice may speed up a bit after the whole unit interior and insulation is cooled down.

You have a blown fuse on the main board. It can be replaced with a new 20 amp glass fuse using a soldering iron. Remove the cover and check the fuse if it is burned that is your problem

You have a blown fuse on the line incoming voltage circut. Remove the main board cover on the back and look for a glass metal ends 20 amp fuse. You can remove the fuse carefully with a soldering iron and solder a new one back in and you will be running again!

Fuse1 blown, replace it with a pigtail 250V, 15A fuse. It's soldered on the board, so it's not that straight forward.