How do i use the taylor 5846-9 timer?

http://waterheatertimer.org/Din-rail-timers-and-manuals.html

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Any chance you put it on self-clean? I had a similar experience many years ago. I seem to remember a scorched pizza because the self-clean door lock wouldn't release. Don't remember what caused it though. (That's a shame about the cake!)

Copy following links:
http://waterheatertimer.org/Woods-timers-and-manuals.html#FM1D
http://waterheatertimer.org/how-to-set-timers.html

Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Press the Mode button until you are on the clock.
Then press and hold the Start/Stop button for 3 seconds.
There should be a beep and the digits will begin to flash.
Press the Min button to increase the Hours and press the Sec button to increase the minutes.
When you have the time set, press the Start/Stop button to finalize the setting.

Press the Mode button until you are on the clock.
Then press and hold the Start/Stop button for 3 seconds.
There should be a beep and the digits will begin to flash.
Press the Min button to increase the Hours and press the Sec button to increase the minutes.
When you have the time set, press the Start/Stop button to finalize the setting.

Here is the back of the packaging.

Press the Mode button until you are on the clock.
Then press and hold the Start/Stop button for 3 seconds.
There should be a beep and the digits will begin to flash.
Press the Min button to increase the Hours and press the Sec button to increase the minutes.
When you have the time set, press the Start/Stop button to finalize the setting.

Love those Taylor Timers! From your description, I believe your mom most likely has the Taylor 5806 (picture below / product website: http://www.taylorusa.com/kitchen/timers/digital-timer.html).



If so, the small instruction sheet that comes with this upon purchase can be found here:
http://www.taylorusa.com/media/IBs/5806_ib.pdf

I hope this answer your question, and if so, please be so kind to give this a thumbs up! Have a good one!

1. Press and hold the "Clock/Timer" button until you hear a beep and the time starts to flash.
2. Adjust the time using the "Hour" and "Minute" buttons. Note the clock includes AM/PM.
3. Tap the "Clock/Timer" button to restart the clock.

my Taylor 5851-21 has Hour Min Then under thatt Timer/Reset abd Start/Stop. How do I set the time. I know how to work the timer and reset the timer, but I need to set the clock. But it does not have a clock button label as you describe above.