Hello. I performed the descaling process last summer and I need to do it again. The problem is I lost the manual and I also forgot how to do it. I searched the Internet but I don't remember to do the descaling like that. I remember the descaling solution flowing from the dispensing head and steam spout both. I really need help urgently. Best regardes, Nathanael.
Fill the tank with detergent and let the hot water run for about 15 seconds. Then turn off the machine for about 15 minutes. Then turn the machine back and let the hot water. Then rinse the water tank and fill it with clean water. Run hot water again to empty the tank. Fill clean water again and then you can put down coffee :)
SOURCE: How to descale machine
you can download and print a manual for your Saeco here
ttp://www.manualnguide.com/download/manual-guide/saeco-odea-go-instruction-manual.html
SOURCE: Water flows from steam spout
Hi,
you have to take it to a Saeco service center to replace a gasket in the steam valve.
SOURCE: descaling
You can download a user manual for your saeco coffee machine here: http://www.coffeeshrine.com.au/user-manuals/
let me know if you have any specific problems once you have read the manual.
SOURCE: Saeco Odea Go - Hot water leaks from bottom of machine
That's leaking from the hoses coming out from the boiler,if the machine is new it should be still under warranty, may have to take it back to the service center.When making coffee the lines are under pressure and the water never have a chance to pass through the ground coffee.
SOURCE: I Have descaled my Saeco Odea Go but still it doesnt brew coffee
That is serious, that means the grinder is jammed or not working. To check the components of the machine follow these instructions.
Press and hold the steam button and turn on the machine, when you see the lights going around in anticlockwise direction, release the button. Turn the coffee dial to the left and press the steam button, the grinder should turn. Dial on the right and pressing coffee ****. water pump runs. Press steam ****. brew group go up, dial 1/4 to left B/Group down.
If grinder not turning the motor is bad. Hope it will help to find out.
228 views
Usually answered in minutes!
×