I just bought a used but mint condition AVR 3700. I connect 2 Klipsch F-35 to the receiver, no sound ! Any idea ? Even after 2 resets processors , still not sound. What is the problem ? Somebody can help me pls ? Ty
SOURCE: No surround sound
Hi,
As you already checked the speakers, the HK manual says to check if the
audio analog chain is fine. That means selecting 6/8 direct channels as
source and apply a sound source for each channel. You can use a CD and
test each pair of the 6/8 inputs at a time or use the output from a PC
sound card with a test generator software (some excellent free software
available as from NCH swift). Adjust the volume and listen. I guess you
will obtain sound from the right front channel.
If you have sound in all speakers at the end of the test it means all audio channels are fine end to end.
The
good news according to HK manual is that you eliminated 90% of the
component of the system. The bad news is the problem is in the DSP
section. There are no instructions or tests for the DSP part so you
will have to go to the service center.
Goodluck..
SOURCE: OSD not working (black screen)
Your 635 will not display the OSD screen through component. You must use either s-video or rca. It won't upconvert the screen menu this route.
I had one up until a week ago. There are two outputs on the back specifically for the OSD screen. I used a separate old 13" TV with s-video to do my setups. Hope this helps.
SOURCE: I cant get any sound out of my Harman kardon AVR
Hi! The rca output may be faulty causing it not to give sound to the speakers. If that will be the problem then you will have to have it replaced for it to work again. Hope this helps and have a good one!
SOURCE: My Harmon Kardon AVR 500 sound doesn't work, I
Hi it is seem there is no output from your device. Please check the circuit components and wires for malfunction in your Kardon then. Regards
1,351 views
Usually answered in minutes!
×