Turn off child lock

I can't find anything online about error code CL9. Even the owner's manual does not list that error code.


https://www.searspartsdirect.com/partsdirect/user-manuals/dv48j7700ewa202-samsung-parts-manual

Try buying a long handled short bristle cheap artist's brush and gently clean inside the housing. Probably a chunk of lint thinks it's found a new home.

For some Electrolux models, icluding the EDC2086PDW, the child lock (control panel lock) is toggled on and off by pressing and holding the Time and Wool Load touch pads together. Hold the buttons until you hear the beep or the indicator light goes off. (The dryer needs to be on for this to work.) On the EDH3498RDL, the two buttons are the Time and Anti-Crease. On both of these models, the two buttons are the left-most pair of a set of four buttons to the right of the LCD screen.

The much newer EDH3498RDL uses a different Control Lock method. Press the Options button repeatedly until the LED next to Lock is let. Then press the adjacent Set button. The Lock option is in the column just to the left of the Start button.

Please add a comment with the model number of your dryer to get the procedure for your unit. I hope this helps.

Cindy Wells

This information is from the manual:
Child Lock can be used to prevent your children from changing options on control panel while the dryer is running. When child lock is enabled, all the buttons will be locked and Child Lock glows. To enable Child Lock, Press and Hold OPTION for 3 seconds, A single beep tone is heard and Child Lock is displayed on the status window. To disable child Lock, press and hold OPTION for 3 seconds again.

im not sure if your model of dryer but here is some instructions
Child lock
When activated, the child lock prevents the dryer from being operated by locking the control panel functions.
The dryer can be turned on but not started. The "Child lock" indicator will flash.
The door can be opened.
To activate the child lock
1. Make sure the dryer is turned off and
the door is closed.
2. Press and hold the "Anti-crease" and "DRYNESS" buttons at the same time, hold until step 5.
3. Turn on the dryer with the "On/Off" button.
4. Press the "OPTIONS" button 3 times. 5. Release the "Anti-crease" and
"DRYNESS" buttons.
The "Child lock" indicator will flash and the dryer is now locked.
6. Turn off the dryer using the "On/Off" button.
To deactivate the child lock Repeat steps 1. to 5.
The "Child lock" indicator will go out. The control panel is now unlocked.
6. Turn off the dryer using the "On/Off" button.

In the owners manual there is directions on how to unlock it, sometimes as simple as just holding down the child lock button for a period of time

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

Child Lock activated. Look for a picture on the Facial Panel with a small child's face (usually accompanied with a lock) follow the arrows to 2 buttons, press and hold these buttons for 3 - 7 seconds. Child Lock will then deactivate.

Hope this helps

* If you found this solution helpful, please vote positively.

HI!!
Child Lock can be used to prevent your children from undesirable use on control panel while the dryer is running. When Child Lock is enabled, all the button will be locked and Child Lock glows. To lock Child Lock, Press and hold Rack Dry for 3 seconds, A single beep tone is heard and CL is displayed on the status window. To unlock Child Lock, press and hold Rack Dry for 3 seconds again.
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

To unlock, press and hold DRY LEVEL for 3 seconds. The indicator light turns "off".