On my new Insignia 50" tv, the AV input is grayed out (not available as an option).

This step may could depend on the model of your Insignia TV. The following applies to the Insignia 39" NS-39DR510NA17 . For the first time setup, press the Home button on the Roku remote and select the Antenna TV icon. Use the on-screen prompts to scan for channels.

For subsequent scans, press the Home button on the remote. Select the Settings icon. Navigate to Settings > TV Inputs > Antenna > Scan Again for channels. Select Start finding channels and use the on-screen prompts.

To watch TV, you can use the Antenna TV icon. Alternatively, change the TV source to Antenna TV from the TV Input list. Press the Back button on the Roku remote while watching any TV input (including the TV). You can also use the TV's Power/Input button. With the TV on, quickly press and release the Power button to see the Input list. Press and release the Power button as needed to navigate between available inputs.

The manual for the NS-39DR510NA17 is available on the product support page: https://www.insigniaproducts.com/pdp/NS-39DR510NA17/4863802 . The current link to the user guide in English is https://files.bbystatic.com/BY%2BJOWQWsBJ1tSWjNPcHnA%3D%3D/NS-39DR510NA17-CA17_17-0124_WEB_V4_EN_Final_lr.pdf . Other Insignia TV manuals may be available from the manufacturer. Try searching at https://www.insigniaproducts.com/ for your model.

I hope this helps.

Cindy Wells

what the message is telling you is to select the input source to use AV channel selection ( AV 1--AV 2--AV 3 etc )
antenna - dvd player , gaming console etc

You can select its other 2 av inputs by pressing the AV button on its remote control.

Look at your remote for a button called "input options" and press that button while watching your screen to see the various choices available. Everytime you press that button, you should see a change on the screen from one choice of input method to the other. It should says things like "AUX, video 1, video 2, hdmi, AV - ect. Keep pressing that button until you see a picture of find the AV input method you want to keep and that should solve your problem.

pls check from channel one to zero you can see AV input.

If you hear a noise, when triying to read DVD, I am shure I´ts teh engine malfunktion.
you must get the mechanisiam or take this to a service.
I´ts very difficult for lenses to get brocken.

MOST LIKELY the RF out put signal is the same as a local tv chanel 1) try menue change rf output suggest rf 68! OR connect av leads (red white yellow)from the output of your vcr and connect the other end to an Av input eg AV1 on your TV use tv remote to select the AV input

Check to make sure it is on either the AV 1 or AV 2 channel

I don't exactly know your model. I can give you a generic type answer.

I can tell you that when you select to have the full screen, it may not work in the mode for the tuner. The reason is that the programs coming in from your tuner are actualy 4:3. When asking for a full screen you are asking for a 16:9 type format. This would stretch a 4:3 picture.

Have you tried contacting the manufacture, or if you know their local factory support place for your area?


Jerry G.

connect to front press av input button. set it on av 2. make sure your tv input is set to v2-component.