Question about ESQ Watches

Open Question

How do i add a link to my ladies ESQ swiss ladies dress watch. it's silver and theres the number 100516 on the back. i have the pins and the links, but the others pins refuse to come out so that i can add another link...is there a special way? i just got it back from TWAIN who sized it for me but they made it too small and i don't want to have t take it back and wait another couple weeks just to do something that maybe i could do???

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I need a pin &

fixed by jewelry store. Needed new pin & barrel. thanks

Posted on Sep 17, 2008

Ad
  • 43 Answers

SOURCE: can't get my croton watch to work.

There are a few possible reasons why your watch is not working:

  1. The battery is dead (sometimes even new watches have a dead battery in them).
  2. The plastic piece between the crown and the watch case was not removed (this protects the battery from wearing down until you receive the watch).
  3. You bought a watch with a damaged movement and it just will not work period so you may have to return it, exchange it, or have it repaired
These are the 3 reasons why your watch could not be working. The reason will fall into one of these 3 categories, so I hope this helps!

Posted on Jan 05, 2009

  • 1 Answer

SOURCE: Unable to set the date on an ESQ Gentlemen's Quest Big date

l Have a E3675 with three small dials know one is seconds dont knkow what the other two are

Posted on Jan 27, 2009

  • 61 Answers

SOURCE: I changed the battery in my esq swiss watch and

ooh, ESQ by Movado. These case backs are often pressure fit, just like Movado, and are notoriously difficult to reinstall. It sounds like it is going to take a watch press to install your caseback. This is an expensive tool which any jeweler that changes batteries will have. There is no real safe way to this without a press.
Now, I have just supposed that this is a pop off; if it is a screw on back then it would have had to have been unscrewed to get it off. If it is a screw-back then you will likely need to get a caseback wrench to tighten it down enough.

Posted on Oct 19, 2009

  • 93 Answers

SOURCE: How to change battery in ESQ Swiss E5290 or where

you can find a exper in you real life or in the watch shop..cheap aion kinah

Posted on Dec 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont know how to remove the inks on my swiss legend watch


The links are removed by a variety of methods. Look at the side of the link, is there a small pin? if so there will be an arrow on the back of the link. this is the direction to push the pin out. there also may be a flat pin in the end on the back of the link you will see a little round hole covering half the pin this will need a jeweller to remove.

Jan 04, 2018 | Swiss Legend Watches

1 Answer

How do you remove links


There are small pins that are friction fit into the band. You will need a small screwdriver or something the less than the diameter of a paper clip. Using a small hammer tap the pin out in the direction of the arrow which is indicated on the back of the band. Do so for however many links that need to be removed. After doing this then put the band back together and replace the pin by taping it in until it is flush. Use a thin cloth over the pin when taping so you don't scratch the case. Good luck. If you need a professional go to a jeweler to help you out.. Thank you, Gabe.

Oct 14, 2015 | Bulova 98L157 Ladies Dress White Watch

1 Answer

I changed the battery in my esq swiss watch and can't get the back on the watch. What is the trick to re-installing the back


ooh, ESQ by Movado. These case backs are often pressure fit, just like Movado, and are notoriously difficult to reinstall. It sounds like it is going to take a watch press to install your caseback. This is an expensive tool which any jeweler that changes batteries will have. There is no real safe way to this without a press.
Now, I have just supposed that this is a pop off; if it is a screw on back then it would have had to have been unscrewed to get it off. If it is a screw-back then you will likely need to get a caseback wrench to tighten it down enough.

Oct 18, 2009 | ESQ Swiss Muse 07101116 Watch

1 Answer

Can't get my croton watch to work.


There are a few possible reasons why your watch is not working:
  1. The battery is dead (sometimes even new watches have a dead battery in them).
  2. The plastic piece between the crown and the watch case was not removed (this protects the battery from wearing down until you receive the watch).
  3. You bought a watch with a damaged movement and it just will not work period so you may have to return it, exchange it, or have it repaired
These are the 3 reasons why your watch could not be working. The reason will fall into one of these 3 categories, so I hope this helps!

Jan 05, 2009 | Croton Watches

2 Answers

New band


You can either contact Movado directly (they make the esq watches) or you can ask any REAL jewelry store to contact the company for you and ask about this as long as they carry either Movado or Esq in their store (don't ask the jewelry counter at your local department store).

Dec 30, 2008 | ESQ Swiss Muse 07101116 Watch

1 Answer

Link pins keep falling out on Ceramic Watch


They probably forgot to put the little locking barrel back in before hammering the links shut again. Some watches have the link, the pin, and a barrel that goes in the link before the pin is hammered in. If your watch needs this barrel then the pin will NOT stay in without it, no matter what.

Dec 29, 2008 | Swiss Legend SL-LUCERNE-ML134AC Wristwatch

Not finding what you are looking for?
Watches Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top ESQ Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Norman Worley

Level 3 Expert

1273 Answers

Are you an ESQ Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...