Need written instructions on how to reset Ip code Konica bizhub C451

English only on Fixya please. We are a North American website.

Error Code Pls help - Konica Minolta

Copytechnet https://www.copytechnet.com > ... > Konica Minolta Jun 20, 2012 - CD252 (C-D252) code at start up. Solution CAUSE: The Controller 1 setting is enabled in Tech. Rep. Mode without the IC-409 (Fiery® ...

fuser error code C252
May 7, 2014
Bizhub C451 bad print quality, no accurate color
Jun 4, 2014
Error Code Bizhub 283 with C-D272
Mar 17, 2016
error code C- D251 bizhub C451
May 19, 2009
More results from www.copytechnet.com

Konica-Minolta bizhub C452 - Error Code

Printcopy.info https://printcopy.info > model=bizhub+C452 Code: CD252; Description: No relay circuit boards for IC-412 mounting at IC-412 mount setting; Causes: MFP board (MFPB) Relay circuit boards (VI-505) .

..

NVRAM /ROM data over written on MFPB
so model is not getting recognise.

Re-write Firmware and see, else MFPB to be replaced

using static ip or dhpc please use static ip copiers like static

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

check the mail server and check that a static ip address was isssued to the copier, copiers love static ip address.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If you want to link up your computer and photocopier machine through network, then IP address is required to be assigned to the machine.

mite be conflict another device may be using that ip address

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

konica minolta c451 printing problem

Mite want o check the IP address there where more than likely set as static. Can the copier be pinged? Also ensure all the folder s at stilled shared.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Network settings are accessed through the Administrator menu. Press Utility/Counter, then choice #3 should be Administator Settings. Enter your admin password and Network Settings should be choice #5.
Also, if the bizhub is already on the network, you can enter the IP address into your web browser and log in as an administrator to get to the network settings.

If you know the IP of the machine, just type it in the browser address and you'll have access from there.

Reset your Toners and Imaging units for Minolta Bizhub and CF series.
http://www.chipreset.eu