Dacor MORD230S 30" Millennia Double Wall Oven with Double Convection i Logo
J
Joshua Prestage Posted on Nov 19, 2013

Dacor MORD230S bottom oven will not heat up.

Bottom oven will not heat up, Fan comes on.

1 Answer

drbuch

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 14 Answers
  • Posted on Nov 19, 2013
drbuch
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: May 29, 2009
Answers
14
Questions
0
Helped
4358
Points
31

Does any of the elements get hot?

Testimonial: "Both elements do not get hot."

  • drbuch Nov 19, 2013

    You are only getting 110 volts instead of 220v. Check the connections for the bottom oven...

×

4 Related Answers

Anonymous

  • 1 Answer
  • Posted on Mar 12, 2008

SOURCE: bottom oven of dacor double oven

I found the lower circuit breaker had been tripped. That didn't fix the problem but upon further inspection whoever had worked on the unit years ago had dropped a screwdriver that had lodged between the oven wall and the rear casing and shorted out the lower heating element. I removed the screwdriver and oven works fine now. I don't think that will solve the cmmclow problem but maybee the curcuit breaker is tripped.

Ad

Tyler T

  • 35 Answers
  • Posted on Sep 22, 2008

SOURCE: Dacor ECS230 Epicure Electric Double Oven

You probably tripped a safety thermostat in the back of each oven. If you turn off the breaker and find a way to pull the units out you could probably remove the rear panel and reset the thermostat by pushing in a button on the back of the open thermo. Some thermo's aren't resettable though so you'd have to buy a replacement.

Anonymous

  • 1 Answer
  • Posted on Nov 20, 2008

SOURCE: Dacor Double Oven

HI - I just had the same problem - repairman came and reset the breaker in the oven which "tripped" (even tho I havent used the lower oven in months).  Read posts here on other Dacor ovens which explain how to get to the reset switch to avoid having $150 in repair costs - I have not tried that myself tho but good luck!

TheMobilian

Dan Webster

  • 8221 Answers
  • Posted on Aug 21, 2009

SOURCE: How do I reset the thermostat on Dacor ECS130?

iT HAS A PUSH BUTTON RESET CLICK HERE FOR THE DACOR MANUAL AMIGO LOL

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Dacor wall oven MORD230 cont'd beeping,disconnecting power to unit did't work,error code 01 appear on display

Hello. The error means there is a shorted key on the keypad. The part number you will need is 701044-02, called "membrane panel assembly, black". The main board, if needed, is 101991, called LED display module. Hope I helped you!
Aug 21, 2015 • Dacor Ovens
14helpful
1answer

PCS 127 does not heat up. Fan and preheat start.

We were able to unscrew the plate that sits behind the latch. 6 screws I believe. Look towards the middle back-right side you will see a red switch. Click it twice. Before we put plate back we tested oven and it worked!!! Hope this info will help you. Dacor oven has been a real problem and I'm a kitchen designer. Will never recommend Dacor anything to my clients after many oven issues.
Jan 25, 2010 • Dacor Ovens
0helpful
1answer

Dacor 1.5 years old convection oven...not heating

Flip both oven breakers HARD to the "off" position, then back on. If it did not help - you might have a problem with a relay on the control board or a failed bake element.
Grab a flashlight and check the element on the bottom (if you can see it). DO NOT TOUCH THE ELEMENT! If you find any bulging or cracking on the element - it'd out. Before removing the element turn the oven off on the breaker panel.
PS Model number is needed to find the part numbers.
Oct 22, 2009 • Ovens
0helpful
1answer

My upper oven/ convection function on my dacor ecs230b will not heat

Bake and convection bake settings both use the bottom bake element to heat. It would be unusual for bake to work without conv. bake working. You also have pure convection which uses a different element surrounding the conv. fan on the back of the unit. If you press a feature and nothing happens it's the touch pad. If it comes on then turns back off it's probably the ERC (clock). If it comes on and wont heat only in pure conv. possibly an upper relay board or element problem.
2helpful
1answer

Our Dacor Millennia wall oven will not heat

There is a manual reset button behind the vent under the touch pad. Turn off the power. Open the door. Remove the vent. Behind the latch is a two wire switch. press the red button on it until it clicks. reassemble and turn on power. It over heated when the power went off by stopping the cooling fan.
1helpful
1answer

Dacor Double Oven

HI - I just had the same problem - repairman came and reset the breaker in the oven which "tripped" (even tho I havent used the lower oven in months).  Read posts here on other Dacor ovens which explain how to get to the reset switch to avoid having $150 in repair costs - I have not tried that myself tho but good luck!
0helpful
1answer

Bottom oven of dacor double oven

I found the lower circuit breaker had been tripped. That didn't fix the problem but upon further inspection whoever had worked on the unit years ago had dropped a screwdriver that had lodged between the oven wall and the rear casing and shorted out the lower heating element. I removed the screwdriver and oven works fine now. I don't think that will solve the cmmclow problem but maybee the curcuit breaker is tripped.
0helpful
1answer

Dacor Oven - convection fan stays on while on "bake" setting

Question: does the unit appear to hold the correct temperature? Most convection units only turn the heating elements on and off...not the fan. If the unit is reporting operating temp and then taking other direction...and it is cooking right...you're done.
7helpful
3answers

Display reads U60 Cooling Fan - oven won't heat

The code is telling you that the oven has sensed a fault in the coling fan circuit of the upper oven. Dacor has had a few problems with the cooling fans in these new ovens since theyve been out, so most likely you will have a bad fan motor. If that is the case, be prepared to have the repair person have to pull the oven out of the wall to get to it and change it. If its a realy board problem (less likely) than that can be changed from the front. Call up Dacor and find an authorized servicer in your area since it will still be under warranty. Good Luck!
Not finding what you are looking for?

240 views

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Bade

Level 3 Expert

1818 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...