I need a driver for Roland VersaCAMM SP-540V for windows 7

Question edited for FULL 'make model (what it is)'.
Question moved from Computers to correct category.
"DATA ERROR CANCELING..." Output was stopped because a problem was found in the data received.
Operation cannot be continued. Check whether or not there is an error in the data. Check for a problem with the connector cable or the computer, and redo the operation from setting up the object to be printed on.Roland Technical Support.

VersaCAMM VP-540 54" Eco-Solvent Inkjet Printer/Cutter

https://www.rolanddga.com > products > print-printcut
VersaCAMM VP-540 54" Eco-Solvent Inkjet Printer/Cutter technical support page such as support articles, support guides, software updates, firmware, ...

..

Did you ever fix it? Mine is doing it now.

How to stop BN20 from beeping due to one empty ink cartridge. Need to purchase replacement.

hello
try to clean the Encoder strip of your sp540, gently with alchool isoprophilic
i add a video explaining (the procedure and the result is the same for sp540) i hope this is helpfull. good luck

if the problem is persists you have to replace the data cable connected to the head ( this cable goes foward and backward with the movement of the heads and sometimes it brokes ) i had the same problem and the solution is this.

the 0101 error in sp540 is the Limit Position Initialize has not been done. you find videos on you tube that can help you to do the limit position operation. (you have to enter in Service Mode Menu) its easy to do it yourself. i hope this help.

hello Arnie
do you have already a solution for your problem?

hello m f azam
have u solve the problem already?

hello
i add a video explaining how to install sp540v in win7
u need to install the Intercon-NetTool (that u can download from the Roland website) to allow the comunication with the plotter. its all well explained in the video. good luck

i had a similar problem with my sp540 and the solution was the strip (the electrical one, that is connected to the head, broked)
have to be replaced. and everything goes ok .good luck