Can not pair with my new Blackberry storm - Help???

Question 1

14helpful

1answer

I have a new phone (HTC EVO) and have lost my manual and can't figure out how to pair it to my BlueAnt Model BTSLBC3

Hey,

All you need to do is put the device into pair mode. To do this hold the green button on the ST Light, while holding the green button release the microphone arm. You should get a blue/red flash letting you know the device is in pair mode. When you get this, go to your phones bluetooth menu and search for devices. Select the ST Light and if prompted enter the pin 0000.

Regards,

Dec 08, 2010 • Blueant Supertooth Light Bluetooth Speaker...

9helpful

2answers

I have a BlueAnt Supertooth BTSLBC3 car speaker that won't pair up to my new BlackBerry curve 8530 phone. The BlackBerry won't see the BlueAnt Supertooth BTSLBC3. The BlueAnt Supertooth BTSLBC3 is paired...

Pairing Your BlueAntStep 2: Activate Pairing Mode on the Supertooth Light

If the microphone arm is open, close it to turn the Supertooth Light off.
Press and hold the answer button.
With the answer button held down, open the microphone arm.
The lights will start flashing red and blue, indicating that the Supertooth Light is in pairing mode.

You now need to activate Bluetooth

Apr 03, 2010 • Blueant Supertooth Light Bluetooth Speaker...

20helpful

2answers

How do I pair my supertooth light with a Blackberry 8520?

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.

5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.
For more detailed information download the Blueant manual from the link below:
http://www.blueant.com.au/knowledge/manuals.php
I hope it helps.

Feb 22, 2010 • Blueant Supertooth Light Bluetooth Speaker...

2helpful

1answer

I am trying to connect my blackberry storm to my blueant ST3. It asks me to enter my passcode, but when I do, nothing happnes and keeps asking to try again.

initially check whether both the devices are compatible when your pair them. Then try to give the same passkey on both the devices like 1234 in your blackberry and also same 1234 on your blueant ST3 and check.

Dec 29, 2009 • RIM BlackBerry Storm 9530 Smartphone

0helpful

1answer

Hi, i have a supertooth light BTslbc3 and it has

Did you DROP the BTslbc3 from your old phone? If not, it may not pair with the new one. That is just a suggestion you may want to try. It may not pair with the new if it is still paried to the old. Hope this helps.

Oct 20, 2009 • Blueant Blue Ant 091193 Supertooth II...

0helpful

1answer

K800i conection to BLueanny Speaker bluetooth

Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

Jun 18, 2009 • Sony Ericsson Bluetooth handset pink...

437helpful

6answers

Blue Ant ST3 will not recognize 0000 passcode.

If the Supertooth 3 is on, turn it off by holding down the green Multi-Function button for about 5 seconds (until you hear a voice announce "BlueAnt ST3 powering down").
Hold down "Vol +" and the green Multi-Function button until you hear a loud siren/distinctive tone.
The Supertooth 3 will turn on. Hold down the green Multi-Function button for about 5 seconds to turn it off again.
The Supertooth 3 has now been reset: all pairing and other information has been deleted. When you turn the Supertooth 3 back on again it will prompt you to select a language and then go into pairing mode.

You will now need to re-pair your phone with your Supertooth 3.

Jun 11, 2009 • Blueant Blue Ant 091193 Supertooth II...

19helpful

2answers

Lost manual for BTSLBC3

Go to http://www.fixya.com/support/t1267258-pairing_problem_supertooth_btslbc3 All solved! :)

Feb 15, 2009 • Blueant Supertooth Light Bluetooth Speaker...

5helpful

1answer

Problem Pairing Blackberry 8700 w/ BlueAnt Z9 Bluetooth Headset

This problem has been solved by turning on the blue ant system then holding down the vol - and vol + buttons simultaneously for 5 secs.

Dec 15, 2008 • RIM BlackBerry 8700c Cellular Phone

235helpful

5answers

Pairing problem for Supertooth btslbc3

-----How to Create a new Connection----

Pairing with Phone
1. Turn off all devices (ST Light and Phone)
2. Turn on Phone
3. Goto Bluetooth menu on the phone (might be in connectivity)
4. Go to device list or paired devices (make sure bluetooth is turned on)
5. Delete any old profiles that are still in there.

6. Goto the Supertooth Light (BlueAnt)
7. Hold down the green button (send button)
8. while holding it down, open the microphone
9. the light should start to flash "red" and "blue" (you can release the green button)
10. go back to your phone, and go into either 'device list' menu or 'paired devices' menu on your phone.
11. click on either search, add or new devices. Function depends on different phones
12. when the phone has found the device, it should say 'ST Light BA V1'
13. select it, then enter passkey "0000"
14. If your phone ask for authorization or auto connect, just click "yes"

Nov 19, 2008 • LG HBM-730 Wireless Headset

Question 2

Anonymous

Contributor 1 Answer
Posted on Jul 18, 2009

Anonymous

Contributor

Joined: Jul 18, 2009

Answers

1

Questions

0

Helped

1483

Points

19

Make sure the BlueAnt Supertooth 3 is turned OFF.

Press+Hold the Volume Up button and then also press the green button to reset the unit.
After completing the above reset, turn the ST3 OFF again and wait at least 10 seconds.
Turn unit back ON and select language when prompted.
Follow the voice prompts and pair the ST3 with your blackberry as normal.
After pairing has completed you will hear the ST3 announce “loading phonebook – please wait”.

When your blackberry ask your permission to allow bluetooth to connect and donload phonebook allow it permanently.

Related Topics:

Can not pair with my new Blackberry storm - Help???

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a new phone (HTC EVO) and have lost my manual and can't figure out how to pair it to my BlueAnt Model BTSLBC3

I have a BlueAnt Supertooth BTSLBC3 car speaker that won't pair up to my new BlackBerry curve 8530 phone. The BlackBerry won't see the BlueAnt Supertooth BTSLBC3. The BlueAnt Supertooth BTSLBC3 is paired...

How do I pair my supertooth light with a Blackberry 8520?

I am trying to connect my blackberry storm to my blueant ST3. It asks me to enter my passcode, but when I do, nothing happnes and keeps asking to try again.

Hi, i have a supertooth light BTslbc3 and it has

K800i conection to BLueanny Speaker bluetooth

Blue Ant ST3 will not recognize 0000 passcode.

Lost manual for BTSLBC3

Problem Pairing Blackberry 8700 w/ BlueAnt Z9 Bluetooth Headset

Pairing problem for Supertooth btslbc3

Not finding what you are looking for?

Supertooth Light Bluetooth Speaker Car Kit

I have a new phone (HTC EVO) and have lost my manual and can't figure out how to pair it to my BlueAnt Model BTSLBC3

Ask a Question

Top Blueant Radio Communications Experts

eradiostore

Grubhead

Brad Brown

Are you a Blueant Radio Communication Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Can not pair with my new Blackberry storm - Help???

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a new phone (HTC EVO) and have lost my manual and can't figure out how to pair it to my BlueAnt Model BTSLBC3

I have a BlueAnt Supertooth BTSLBC3 car speaker that won't pair up to my new BlackBerry curve 8530 phone. The BlackBerry won't see the BlueAnt Supertooth BTSLBC3. The BlueAnt Supertooth BTSLBC3 is paired...

How do I pair my supertooth light with a Blackberry 8520?

I am trying to connect my blackberry storm to my blueant ST3. It asks me to enter my passcode, but when I do, nothing happnes and keeps asking to try again.

Hi, i have a supertooth light BTslbc3 and it has

K800i conection to BLueanny Speaker bluetooth

Blue Ant ST3 will not recognize 0000 passcode.

Lost manual for BTSLBC3

Problem Pairing Blackberry 8700 w/ BlueAnt Z9 Bluetooth Headset

Pairing problem for Supertooth btslbc3

Not finding what you are looking for?

Supertooth Light Bluetooth Speaker Car Kit

I have a new phone (HTC EVO) and have lost my manual and can't figure out how to pair it to my BlueAnt Model BTSLBC3

Related Topics

Ask a Question

Popular Questions

Blue Ant ST3 will not recognize 0000 passcode.

BlueAnt pairing with iphone...help

I have a bluetooth blueant

Lost manual for BTSLBC3

My g3 iphone says blue ant st3 password incorrect

Top Blueant Radio Communications Experts

eradiostore

Grubhead

Brad Brown

Are you a Blueant Radio Communication Expert? Answer questions, earn points and help others

Manuals & User Guides