Question about Akai PT5598HD 55" Rear Projection HDTV-Ready Television

Open Question

AKAI PT5598HDI WHERE IS THE LAMP LOCATED - Akai PT5598HD 55" Rear Projection HDTV-Ready Television

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 240 Answers

SOURCE: WHERE ARE THE FUSES LOCATED FOR AKAI PT5598HDI 55" PROJECTION TV?

replace your convergence IC chips it is not a fuse problem.

Posted on Jan 11, 2009

Ad

Anonymous

  • 240 Answers

SOURCE: TURN ON POWER TO MY

Convergence IC's
replace them.

Posted on Jan 11, 2009

futurework

Dan Larson

  • 70 Answers

SOURCE: AKAI PT5598HDI 55 Where is fuse located

This problem is beyond a blown fuse most likely. The fuses for the unit are located on the circuit boards and the back will need to be removed to access them. This problem could be due to a missing voltage that is used to turn on the picture section of the electronics. I would search for a used unit on ebay or parts on ebay and swap out the boards. The board swap is not too complex but voltages are dangerous within the set and service by a qualified electronics technician is recommended on this unit. Thanks and good luck. Dan

Posted on May 31, 2009

Anonymous

  • 3 Answers

SOURCE: AKAI PT5598HDI Colors out of line.

http://www.fixya.com/support/t1663670-akai_samsung_pt4299hd_convergence Adjust the convergence manually. It's a pain and takes alot of patience. The diagram for the remote buttons helps a lot. If it won't adjust you'll have to replace a part inside the tv. Good luck! Hopefully it'll adjust.

Posted on Jun 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AKAI PT50DL14X\SMS - LAMP INDICATOR (GREEN)


AKAI PT50DL14XSMS - LAMP INDICATOR (GREEN) FLASHES ABOUT 20 TIMES - CAN HEAR FAN RUNNING AND LOOKING THRU LAMP GRILLES CAN SEE BRIGHT BULB LITE - NO PICTURE COMES ON - AFTER ABOUT 30 SECONDS EVRYTHING SHUTS DOWN

Nov 02, 2009 | Akai PT50DL24 Television

1 Answer

Akai PT5598HDI Rear Screen Projection TV With Blue Shadowing


If the ghosting is like a 3D effect its your convergence ICs , but if its like a blue Halo around objects that usually means your CRT coolant has congealed and will need replacement. The blue is the first tube to congeal for some reason, followed by green. Red seems to be not quite as prone to this. It is a normal occurrence n sets about 4 years old to need the coolant changed.

Jan 25, 2008 | Televison & Video

1 Answer

My akai rear projection dlp tv has no power and I don't know where the grille lamp is located. I'm not sure why the power is not coming on, I've check all I know to check.


The lamp is accessed removing a panel on the back right side. If there are no lights at all it may not be the lamp but the power supply (no fuses inside).

Oct 05, 2009 | Akai PT46DL10 46" HDTV-Ready Television

1 Answer

AKAI PT5598HDI Colors out of line and picture is bowed in on bottom and top.


http://www.fixya.com/support/t1663670-akai_samsung_pt4299hd_convergence Adjust the convergence manually. It's a pain and takes alot of patience. The diagram for the remote buttons helps a lot. If it won't adjust you'll have to replace a part inside the tv. Good luck! Hopefully it'll adjust.

Jun 14, 2009 | Akai PT5598HD 55" Rear Projection...

1 Answer

AKAI PT5598HDI 55 Where is fuse located


This problem is beyond a blown fuse most likely. The fuses for the unit are located on the circuit boards and the back will need to be removed to access them. This problem could be due to a missing voltage that is used to turn on the picture section of the electronics. I would search for a used unit on ebay or parts on ebay and swap out the boards. The board swap is not too complex but voltages are dangerous within the set and service by a qualified electronics technician is recommended on this unit. Thanks and good luck. Dan

May 31, 2009 | Akai PT5598HD 55" Rear Projection...

1 Answer

AKAI PT5598HDI 55" PROJECTION TV HAS POWER AND SOUND, NO PICTURE


Open the back of the tv and check Fuses, sound like the high volt over loaded

Jan 11, 2009 | Akai PT5598HD 55" Rear Projection...

1 Answer

PT5598HDI Wiring Problem


the red wire will go somewhere to the right side near the High Voltage section. The green wire is probably antenna. DO NOT get them crossed...

Question. what connector if any is attached? The board will usually have a pin sticking up that is marked...

Jul 13, 2008 | Akai PT5598HD 55" Rear Projection...

1 Answer

PT5598HDI


More likely Icz103 & Icz104 the convergence amps. Are they heating at all?
Bill

Apr 25, 2008 | Akai PTH5498 54" Rear Projection...

Not finding what you are looking for?
Akai PT5598HD 55" Rear Projection HDTV-Ready Television Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76143 Answers

KISHORE DESHPANDE

Level 2 Expert

64 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...