I am trying to pair my bluetooth wep200 with my phone, The keys

1 Set your Bluetooth phone to discover the headset by following your phone's guide. Typically, the steps involve going to the Settings, Connection, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices. Your phone will find the Samsung WEP200 headset. 2 Select Samsung WEP200. 3 When the phone asks if you want to pair with it, confirm by selecting Yes or OK. 4 Enter the headset passkey or PIN, 0000.
Regards MaTi_FleSh

1 Turn your bluetooth headset off. If it is on, press and hold multi-function button(for about 4 seconds) until the LED blinks twice. 2 Prepare your bluetooth enabled phone to be ready to go to search mode. 3 Turn your bluetooth headset on in pairing mode. (Press and hold the multi-function button for almost 9 seconds. The LED will be steadily LIT.) 4 Activate the Search option in your phone. You should see Samsung WEP200 in your phone's screen. Choose that and press OK 5 The phone will ask for a passkey. Press 0000. Then press OK. Give it a few seconds, your phone and bluetooth headset will be paired.

Pairing will create a unique and encrypted wireless link between two Bluetooth enabled devices, such as your Bluetooth phone and Bluetooth headset.

1. Ensure that the headset is off (see Turning the headset on/off).
2. Press and hold the Multi-Function button until the indicator light turns on in blue (approximately 8 seconds).
3. Set your Bluetooth phone to discover the headset by following your phone's guide. Typically, the steps involve going to a 'Setup', 'Connect', or 'Bluetooth' menu on your phone and then selecting the option to discover Bluetooth devices.

4. Your phone will find the Samsung WEP200 headset and ask if you want to pair with it. Confirm this by pressing the Yes or OK key.
5. Enter a passkey or PIN, 0000 (4 zeros), then press the Yes or OK key.
   
   

If pairing was successful, the indicator light will flash in blue 10 times rapidly before going to flashing every 3 seconds. If unsuccessful, the light remains on, and you will need to re-attempt pairing.

I neglegted to put the Bluetooth in pairing mode.

Hold the front button on the WEP200 for about 15-20 seconds, the blue light will be steady and your phone will be able to pair and connect with the headset, passcode is 0000

hey! if you want to pair the bluetooth if 00000 mean same code want to give the pairing device then only you can pair the device! other wise use single digit 0 or 1.
all the best!

Try 0000

i found out that if you turn the bluetooth off and then turn it back, while turning it back on hold it until solid blue light and then try 2 connect with your blackberry i jus got mine and threw my instructions out. and i did this and it worked and if it should ask for a passcode i used 0000.

hold that reciever button until the light is a still...you may have to hold it for about 10seconds and once the still blue buton has come then search for devices on your phone.