I need an operators manual for a Proscan PS27123

you need to try to enter with your remote 91 or 92

you must go to the MEnu, and adjust the digital reception like: SAP etc.

God bless you

Hi maribeljuan1,

There should be an alternative compatible power cable for your TV, such as the cable to your home PC computer, if you desperately need to use it of course. Or for replacement Just go to any electronic store and ask them if they have the power cable for the model of your TV.

Write down your TV model and ask them if they have the cable for it, if they dont just ask them for an alternative cable which " Will " with your specific model.

I hope this helps, good luck!

Found these codes on the website for PROSCAN. www.oncorpus.com, for you model television.I hope this help you with your problem. UNIVERSAL REMOTE CONTROL CODE LIST
For Universal Remote Control brands listed below, please use accompanying Proscan codes
and refer to your Universal Remote Control User Manual for basic instruction for changing TV code to
operate Proscan model.
Proscan codes for Sony TV=8003,8012
Proscan codes for Philips TV=1005,1006,1007,1035,1064,1216
Proscan codes for other universal remotes=272,132,134,116,040,016,024,056,019,262

I haven't found a source on the web, but if you have a specific question, I can look in my manual.
tom

Go to your local shop of electronic parts and ask if they have a remote control for your Proscan PS27123 TV. If they haven't, ask for universal remote control (or go to another shop). Of course it's the expensive way of the problem solution, but it's worth it.

just to be sure, is it vertical or horizontal? Anyway, if it is vertical, it could point out to the vertical Ic section or some loose contacts along the lines. If it is horizontal, it could be a filter capacitor along the horizontal Circuitry. Mark the high voltage capacitors along the high voltage sections.


regards,

chris

No, unless you are receiving over cable or satellite. You will need a DTV converter box if you are using an antenna to receive Over The Air television signals. The Proscan has an analog only tuner, so the ATSC (digital) signals will not be visible.
tom

Good day.
I believe the power supply circuit of your unit got busted. You can also try replacing the fuse. It might caused the problem.


chris

a capacitor blew up, or the flyback exploded?, happened to a RCA 27" tv i used to have!