I cant set the date, because I got the battery replaced and I the date is two days late

Your watch is 12 hours out of step.The date changes ever second rotation of the hour hand.

If you advance the time 12 hours, the date will change at midnight.

You may have to re-set the date.

I am assuming the day changes but not the date. There is a halfway setting on the stem you pull two clicks to set time , one click to set day/date, turn one way for day of the week other way for date. If your actual date is sticking you can try going round and round with the hands (takes awhile) to set it! I have noticed the date is the first thing that goes on these watches. If that does not work it will have to be repaired by a watch repairman. hope that helps:)

Your watch is 12 hours out, as it "thinks" that midnight is midday.

The solution is to wind your watch forward 12 hours and then the date will change at midnight.

Use the crown to set the time. Advance the time by turning it clockwise. Watch the day/date window and when the day/date changes that is midnight. Now that the a.m./p.m. mode is set correctly, advance the time to the one you wish to set it to.

the crown of the watch has two clicks, pull it gently once and you can set the date and day, pull it gently again a second time and you can set the time. The proper way to set the time and date is to set first the day,date late at the actual date, then move the hands around the clock until the date change at 12 oclock this is evening, then moving the hands around until you reach the actual time. By doing so you will set the day, date and time in syn to 24 hrs change.

example: you want to change it to sat 12th 11am
set the day and date to fri 11th
then move the hands around clockwise until the day and date change at 12 oclock continue moving the hands until you reach 11am

mcdevito75 here, If your Fossil watch has a winding stem it may have 2 positions, gently place a fingernail under the crown and lift as gently as possilble, this should allow you to adjust the date without having to cycle thru the 24 hours to get to the date you want. It may take practise but that first position should be there, Set the date to 1 day before the date you need, then set the watch normally the full 24 hour cycle to get the date you want, this way the watch date will set as suppose to at about mid-night for the next days date.

Use this link and browse through my TIPS AND TRICKS: http://www.fixya.com/MyProfile/tips.aspx?usrid=1700524. You will find manual for your watch there.

You have to change day by the means of moving hands clockwise. Move as long as the desired day appears in window, then adjust the date and set time. Rate me, plz.

Try this solution I posted earlier for a similar problem.
Put stem into "set hands" position and adjust hands to the 12:00 position. Day and date should advance at or close to that time.
If you pass 12:00 and there's no change continue rotating another 12 hours (to twelve o'clock again) and they should advance. Once you've found that there's midnight.So say it's now 4:00pm you would need to rotate the hands around the dial again so they pass 12:00 once more (12:00 midday) then four hours more to 4:00.
To set the day/date you can set the crown (winder) to the first position (second posn is "set hands) and rotate winder
eithr clockwise or anticlockwise. Once you discover which direction advances the date and day ring just set it to the correct day/language and date you want then press the crown home.
Hope this solves your problem.

The watch thinks at Noon it is really midnite, so you must scroll 12 hours ahead to repair this. There are usually 2 "clicks" on the stem of the watch when you pull it out, 1 will set time, 1 will set the day/date, be careful to pay close attention to which is happening when you pull out the stem, and setting should go well after that.