I have a Panasonic DVD F-65 Player. One of the discs is in the play position and will not come out. I have tried disc exchange, open/close, select another disc, etc. No dice. The disc selection lights flash like neon "chaser" lights and there is a message in the player window reading "rmtr."

Hyundai DVD-320A / DVD-360A / DVR-510C

1. Method 1:
2. Turn on the player (without a disc inserted)
3. Press 7, 7, 0

1. Method 2:
2. Turn on the player (without a disc inserted)
3. Press 7, 7, PLAY
4. Select region (0 = multi-region)
5. Press SETUP

1. Method 3:
2. Open the disc tray
3. Press 3, 8, 0, 0
4. Select RC (0=codefree)
5. Press SETUP
6. Close the disc tray

The low humming sound is the motor that opens and closes the drawer. It is moving, but the movement is not being transferred to the door by a pulley, a belt or a gear, When you open the drawer completely, it should stop. When the drawer is closed completely it continues to run until the disc is in the proper position to play. As long as that motor is running the DVD will not work because the disc is not in the proper position,

Hi,
Before to apply BFH method as it is final and ultimate fix for these things, unplug unit from wall socket, take off top cover of DVD-CV51and clean optical lens with good quality cotton swab gently and check DVD-CV51 as dirty/ clogged optical lens does not read one disc and player go for next disc to read it and gives up after trying all discs.
Hope this info will solve your dvd player problem.
Thanks.

I tried the WD-40 and it worked........thanks a million !!

Most DVD player can't read open session discs, meaning when you burn your DVD movie there's an option there that when your disc is not full you can still add files on it, it's open session, in your case if you want to play it on dvd player you must select the finalize the disc to close the session and you can play it in any dvd player you want.

Alright, just follow these steps and let me know if you have any problems or questions

1. Power and switch on the Durabrand DVD player.
2. Open the DVD disc tray tray or lid.
3. Press Stop.
4. Press 3 - 5 - 9 - 7 (3597 in sequence). Can be done on remote control.
5. Hidden DVD Region menu appears. Select region 0 or 9 using up or down button on remote control
6. Press OK.
7. Close the disc tray and press Standby on the DVD player front

Have you tried other DVD's in this unit and they work? If so it might be just an incompatibility issue with that DVD in your TV.

First I must say I have different camera, but in my case I must close the disc session from camera menu, so theat after it dvd could be played in dvd players and after it you can't record on that disk anymore. If you alredy know that, then sorry. I have a problem that some non-scratched in any way disks with data just don't respond at all, but that's another story. All the best.

I may have bad news for you. Here's my story with the PVD4744S.

I watched over an hour of a DVD-video disc one night, no problems. The next night, I played only the intro; then the DVD player gave a message, "This type of disc cannot be played. Please insert another disc." Thereafter, I couldn't play any of several DVDs.

The manual gives little help:
http://service.us.panasonic.com/OPERMANPDF/PVD4744.PDF

My disappointment is exacerbated by the declining availability of DVD/VHS players with an RF modulator. Maybe Panasonic should create a repair kit for aging devices.