MURATEC F-520 ERROR CODE 04

Konica Minolta MINOLTA BRAND DIALTA... - Fixya

www.fixya.com/.../p4705803-konica_minolta_minolta_brand_dialta_89...

Konica Minolta MINOLTA BRAND DIALTA 8935-902 BLACK TONER TYPE 603AFOR USE IN MINOLTA DI-520 / MPN:8935902 SKU:1745166 - Recent Questions, Troubleshooting & Support. Recent; Popular · Answered ... Error code c0-f24.

Code c0510 in dialta 520 how to reset - Fixya

www.fixya.com/support/t16313340-code_c0510_in_dialta_520_reset

Feb 2, 2013 - Code c0510 in dialta 520 how to reset - Konica Minolta MINOLTA ...Home · Forum · Fax Machines · Konica Minolta · MINOLTA BRAND DIALTA 8935-902 BLACK TONER TYPE 603A FOR USE. ... BLACK TONER TYPE 603A FOR USE INMINOLTA DI-520 ... My minolta dialta copier has a c-of24 error code,.

C-0600 there is a code shown in my di520C-0600 tell me ...

www.fixya.com/support/t16673596-c_0600

Error code R.4.2 means, either the line disconnected before transmission or the transmitting fax
machine needs maintenance.

This error code 007 means that there is a line fault could be the fax you are sending to, Plug a phone into your skt & test to see if line is crackling.

IF MACHINE IS SAYING "PLEASE CALL SERVICE" 03 then it is indicating you have a fuser problem.(thats the part that warms up to melt the powder onto the paper.) Until the problem with the fuser is repaired this error code will not go away.

F-320 "Please call Service".....Press PROGRAM,*,6.....Press PROGRAM to select "Service Call"....error message will now be displayed.
Most common is #02 (Heater Error) which means you have a defective fuser.
Press PROGRAM to show any other error messages.
Press "STOP" TO EXIT.

Press ..Program, *, 6 ....Press Program to select "Service Call" then press ENTER...the error message will be displayed.
Most common prob was "Heater error" which means a defective fuser unit.

Pick-up roller comes as an assbly and there are 2 pads to replace.
Roller assbly is # DA7A003040
1st pad is #DA7A004050
2nd Pad is #DA7A005050
Contact a local copier dealer who also does Muratec, they should be able to sell you these parts.

By now this may be a mute point given the time differential ....however;.
if the machine is saying"please call service" do the following..
Press Prog,*,6 ..then press the right arrow key until "service call" appears in the lcd then press ENTER.
aAt this time the display will show the error...favorite was "heater error"
Press STOP to exit.
**If heater error is displayed,you will need a service man to replace the fusing unit in the machine.

Error code "OA"....machine thinks it has a faulty Laser unit. You can try a reset ( Menu, *,M..press ENTER.) if it resets GREAT.
If not and the code comes back,most likely Laser unit is defective.
Expensive and time consuming repair.

replace the fuser