Prints blank second page for 1 page document, stops, alarms

'Black' or 'Blank'??

https://www.google.com/search?q=Kyocera+FS-6525MFP+-+prints+black+pages+when+turning+machine+on+in+the+morning

1(833)610-1395 How To Fix Kyocera Printer Printing Blank ...

https://www.cpprinter.com > how-to-fix-kyocera-printe...
Jul 14, 2020 - Wrong cartridge: Sometimes you will see that the Kyocera Printer is printing blank pages, even your ink cartridge is full. The reason behind ...

..

First step in this kind of issue is check the data cable is properly socketed.
Second step is perform a copy operation directly from the printer. If this fails your issue is printer or cartridge, so swap out the cartridge and retry. If still no copy - your printer has an electronics fault.
Step three is try a document ( D2) from a different application (App2). If it prints the new document (D2) - your issue is with the original document (D1) or the application (App1) printing from. Try printing a different document (D3) from the original application (App1). If document D3 prints from App1 - the fault is in the document D1, and if document D3 fails to print - the fault is in App1.

Have you checked the print que
Printer problems can be a real hassle.
From time to time, due to document layout or settings on your computer, in your software of choice, or even on your printer, a blank page may get "printed" with the rest of your document.
Fortunately, this issue is a simple one to troubleshoot.
Click "Print Preview" when you are finished with your document and ready to print.
Observe your document.
If you see an extra, blank page, you have created a second page.
To delete the second page, close Print Preview, go back into the document and eliminate any blank lines in your documents that you may not need.
You may also find an inadvertent page break at the end of your document.
Place your cursor on its symbol and delete it.
Locate the symbol by clicking on the Show Formatting paragraph icon in the toolbar.


Circumvent this "ghost page" if you do not see a second (or additional) blank page in Print Preview.

Specify the number of pages you wish to print, within the Print dialogue box.
This is typically done by selecting the "Print From" option, then entering the page numbers desired.
If your document happens to be ten pages (without, of course, that final blank page), then enter in the "Print From" field the numbers "1-10".
This will print only pages 1 through 10, without an eleventh (blank) page.

Call kyocera's free help desk Monday - Friday 9 am - 6 pm EST at:

1-800-255-6482

are you facing same problem with other document like notepad ...... please check it please ..... open a notepad type some thing like test print and give print and check its comes blank pages or not .... if its not coming please check the document setting how many pages your document heaving you can give number pages you want to print ....... if you facing same problem with notepad please post you comment ........... and try to uninstall the printer driver and reinstall it ..............

You may have an extra page in your word processing program.
Try using the print preview option to see if you have for eg 2 pages in what you think is a 1 page document.

Also, it might be a glitch in your printer software driver, so uninstall the driver and re-install.

either your paper size settings need to be adjusted in the software, or your setup has included a seperator page.

You may need an imaging unit. VERY expensive.

HI there make sure that the paper tray guides are fully against the paper also try sending the job through the manual feed to see if you get the same problem. If you do not then it maybe that the paper cassette separation pad is worn and will need replacing. If your model has no rubber pad at the front of the cassette then you will have a metal hold over one corner of the paper make sure that when the paper lifts that the paper sits under the silver (Dog Ear) as this acts as a separator.

Hope this helps
Thanks J

Reduce the amount of paper in the print try.