Ipod Touch Map Loacation(WPS) Not Accurate!

in the router, reset it.

Hi Mbali, PIXMA MX494 Wireless Connection SetupSome access points (sometimes referred to as routers or hubs) feature an automatic connection button labelled "WPS" which stands for Wi-Fi Protected Setup.This allows permitted devices such as your PIXMA MX494 to connect to your network without needing to enter a password and it enables a quick and easy method of connecting your devices.This method is by far the easiest way of connecting your PIXMA MX494 so if your access point has a WPS button please select the 'WPS Connection Method' tab below for instructions on connecting using this method.If your router does not support WPS we have provided alternative instructions to get your PIXMA MX494 connected so please select the 'Standard Connection Method' tab below.Back to topWPS Connection Method Standard Connection Method Restore to Factory SettingWPS Connection Method Before we start, there are some conditions that must be met in order to use the WPS push button method:The access point must have a physical WPS push button available. Please check with your device's user guide for details. If the WPS push button is not available please use the instructions on the Standard Connection Method tab.Your network must be using the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most WPS enabled access points use this protocol.Press the [Setup] button (B) on the printer. Use the arrow buttons (C) to select [Device settings] and press the [OK] button. Use the arrow buttons (C) to select [Wireless LAN setup] and press the [OK] button. The printer will now automatically search for access points supporting the WPS feature. The following message will be displayed on the printer's screen "Press WPS button of the wireless router about 5 sec. and press [OK] on this printer" Press and hold the [WPS] button on your access point for approximately 5 seconds, then release. For exact instructions on starting WPS on your access point, please refer to its user guide. Press the [OK] button on the printer within 2 minutes. Once connected, the following screen will appear. Press the [OK] button to complete the setup.
Thanks

WPS or Wifi Protected Setup is a button on your wifi router to gain passwordless access from any mobile device that supports this feature.

where is the WPS button? - Canon Community

community.usa.canon.com/t5/Printer...Support/...WPS-button/td.../8893

Dec 27, 2012 - It asks for me to push the WPS button, but can't find? ... Now I am afraid to unplug the printer and move it back to my desk because it will ... starting only 2 days back, it was daily "dropping" my wifi connection with my MacBook.

WPS access point - Canon Community

community.usa.canon.com/t5/Wireless.../What...WPS.../11819

Jan 19, 2013 - What and where is the "WPS access point" button required to set up wififor the ... What and where is the "WPS access point" reqired to use wifi for the MX432printer .... My WPS button is on my the back of my router (blue button) ... I have a tp-link model tl-wr841n and I can't find the access point in the router ...

Connecting your HP wireless printer ' Wireless Printing ...

Wi-Fi Protected Setup (WPS) is a standard for easy and secure wireless network set up and connections. Some of NETGEAR's products use the name Push 'n' Connect for WPS. To use WPS, your product must support WPS and be compatible with WPA security. WPS can automatically set up a random network name (SSID) and strong WPA wireless security for wireless routers, access points, computers, adapters, Wi-Fi phones, and other electronic devices.
WPS lets you use a push button or enter a personal identification number (PIN) instead of manually entering a network name (SSID) and password:

• Push button. The WPS button is either a button on the product or a an option on the wizard or utility screen.

According to the manual, there is no external button on the router. The only way to use WPS is with a pin #. Manual. It appears that to use this feature you need to have access to the router, then get the pin off the router setup page.

Hi there!

X10 is one of the good smartphone around the market nowadays. The answer to all your questions are "two-thumbs-up"!

This is first assuming you are talking about an IPOD Touch. You first have to have wireless connectivity. Once you have wifi go to:

1. Touch Settings

2. Touch Wifi

3. Turn your Wifi ON

4. Select a Wifi network

5. Enter the WEP Key you have created on your router (assuming you have secured your network).

6. Hit Connect