1.8 GHz Mobile AMD Sempron 3000+ processor upgrade

Please include the model number of your computer or motherboard. Audio is not included in processor.

Did you check to see if it would handle that type of upgrade? Maybe that's your problem, it's not compatible. Research and see if it can handle it, then we can find a solution if it can.

Hi, the drivers are mentioned based on the Motherboard and not on the Processor. Please search google for Drivers based on the model number of the Motherboard or visit the manufacturer of the Motherboard Website.

yes without any doubt the ram you should need is DDR 1 or DDR 333mhz or 400mhz either one should do and probably can be found very cheap on ebay. if you really only want 1gb probably best to have 2x512mb sticks as some motherboards didnt like the 1GB modules and needed to be flashed. but if your mainboard is pretty good you will probably find that it can take 2gb

You don't need driver for your processor. You need to upgrade your bios software, because Bios tells you the type of CPU.

no need to worry friend go to nvidia,net

i want AMD Sempron(tm) processor 2800+ free downloads driver

Need to look at the motherboard specs along with the processor "Socket". It will usually be a 754 or 939 depending on what your motherboard says. I wouldn't try too fast and set yourself up for disappointment. I would upgrade the RAM before the processor.

try to configure it in the bios manualy , and set it the right rating 1.8 Ghz so that i will run faster.

or use this: http://www.freshdevices.com/overclock.html

Your processor speed is actually correct AMD calculate the clock speeds differently from Pentium type processors, a 3400+ is a 2.0 GHZ processor, see the list below for speeds Sempron 2500+ 1.40 GHz 800 MHz 128 KB 754 Sempron 2600+ 1.60 GHz 800 MHz 128 KB 754 Sempron 2800+ 1.60 GHz 800 MHz 256 KB 754 Sempron 3000+ 1.80GHz 800 MHz 128 KB 754 Sempron 3100+ 1.80 GHz 800 MHz 256 KB 754 Sempron 3300+ 2 GHz 800 MHz 256 KB 754 Sempron 3400+ 2 GHz 800 MHz 256 KB 754 Don't worry too much about the proceesor not being recognised as long as you know it is running at the correct speed.