The conference room lights go off when it gets light outside

While standing at the switches (outside the room) turn each switch on until the light is activated. You need not be in the room to see the light operating.

I definitely suggest using your conference room table as adining room table because all you need to do is put some placemats and acenterpiece and it morphs into a dining table. I'm not sure that I'd recommend using your dining room table as aconference table because it might look out of place in an office. Also, conference tables tend to have holes inthe center for cords or phones to be plugged in to.

Conference room tables are usually between 28 and 30 inchestall. They can however vary between 26and 38 inches, but these are generally adjustable.

A conference room table is a very large table that is meant to seat at least 6 people. Conference tables are used in rooms that are meant for large meetings. They tend to be round or oval in shape.

has it always been like that or it just started. this can be a speaker gone bad or an unstable line. a simple service may correct that effectively.

yes do a full reset and reprogram for new phone number and all settings when you move phones

This usually means the phone is not receiving enough power. You either have a power issue in the electrical of the new room or the power adapter is not functioning correctly. Try plugging the phone back into the old office to see if it comes up correctly, if it does their is some sort of issue with the electrical supply in the new room. If you have another conference phone try using that power adapter on the non-working phone.

im trying to adoped a monster

Try Feature 99 Feature. This will clesar the large LED

put phone in dnd mode