Question about Electric Mobility Health & Beauty

1 Answer

A key broke off in the ignition of our handicap motorized scooter

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 90 Answers

This is a common issue with the travel scooters. It is usually an easy fix without having to replace the key-switch.
You need the following tools:
Good eyesight and / or good glasses to see down inside the key switch. A strong, thin needle. A jewelers flat screwdriver or eyeglass screwdriver.
The broken key inside the switch will have a flat back and a toothed topped. The toothed side moves a series of spring loaded pins inside the lock.
With the switch turned to the off position...
Place the jewelers screwdriver down inside the switch where the key's teeth are, pushing back the spring pins, and getting leverage under one of the teeth to lift the key out.
The needle is used to release friction and back pressure off the key back against the switch housing.
Work it carefully and be patient.
Once the key piece is out try ebay for a replacement if needed.
A common key number for Pride scooters is the A126

Posted on Oct 28, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I broke my key off in my ignition on my Tao Tao 50cc scooter how can I start it until I get a new key switch ignition


Hi, Anonymous I would take the switch to a locksmith he can remove the key for a beer for more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Hotwire the ignition switch
TaoTao Scorter Starting switch work around
How to hotwire Chinese Scooter
TaoTao 50cc Scooter Owners Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



Mar 21, 2016 | Motorcycles

1 Answer

Key broke in barrel


Hi Debbie, pelase contact me and i can supply you a new low cost barrel with institutions on how to fit it.

Regards
Rob

www.gewizrepairs.co.uk

Mar 06, 2014 | Pride Go Go Elite Traveller Plus 4 Wheel...

1 Answer

Remove broken key from ignition


you might try putting a 'footie' stocking over the end of a vacuum cleaner hose (to catch the part when it comes out) and then pressing the covered end against the keylock hole and the part might just get sucked out

Oct 28, 2013 | Health & Beauty

1 Answer

Amigo handicap scooter -- loosing distance with in use


you'll need new batteries plan on replacing them at 1-1/2 to 2 years

Oct 14, 2012 | Amigo Health & Beauty

1 Answer

The electric brake that is on the end of the 24 volt motor doesn't release


krazy the brake will have to be replaced contact the provider where you got the scooter to ask if they can repair it. If not you can contact Repair Xpress @ 1-877-581-3733 to see if they have a tech in your area Hope this helps

Apr 20, 2011 | Electric Mobility Handicap Scooter

1 Answer

On a odyssey handicapped scooter 4 wheel new do you have to connect the battery or is it connected at the factory


Harv if you turn the scooter on and the lights come on then the batteries are connected. Yes charge before use and the provider that sold you the scooter should have installed the batteries

Mar 11, 2011 | Health & Beauty

1 Answer

Ignition switch damaged by vandals on motor scooter. How do I replace. The product category is Peugeot motor scooter ( not as described below) I had to get through somehow.


identical to a previous inquiry, remove any headstock covers and locate a recessed grub screw, insert Allen key, remove and extract ignition barrel usually by pushing down.if it dont move dont force it you may have to turn key!

Sep 07, 2009 | 2005 Factory bike Chrono SM 250

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Mobility Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1376 Answers

The Knight
The Knight

Level 3 Expert

76100 Answers

Dan Kostella

Level 2 Expert

30 Answers

Are you an Electric Mobility Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...