Error message at start up

Start your PC and press F8 several times until the boot menu comes up. Then select "Safe Mode with Networking". Now get some or ALL of the FREE programs below.

Download, Install and Run Malwarebytes Anti-Malware:
http://majorgeeks.com/download.php?det=5756
When Installing choose the non-pro version.

Download, Unzip, Install and Run TDSSKiller:
http://majorgeeks.com/Kaspersky_TDSSKiller_d6895.html

Download, Install and Run Super Anti-Spyware:
http://majorgeeks.com/SUPERAntiSpyware_d5116.html

If you have an outdated Anti-virus program then Download, Install and Run Avira Anti-Virus:
http://majorgeeks.com/Avira_AntiVir_Personal_-_FREE_Antivirus_d955.html
Make sure to select ALL of the "threat categories" when you install or configure Avira.

You should be in pretty good shape if you run and install all of these programs.

Try this:

Run a CheckDisk:
How to run Chkdsk at the command prompt

(Windows XP)

1. Click Start, and then click Run.
2. In Open, type cmd, and then press ENTER.
3. Use one of the following procedures:
   • To run Chkdsk in read-only mode, at the command prompt, type chkdsk, and then press ENTER.
   • To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume:/f, and then press ENTER.
     
     Note If one or more of the files on the hard disk are open, you will receive the following message: Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
   • To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk volume:/r, and then press ENTER.
     
     Note If one or more of the files on the hard disk are open, you will receive the following message: Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
     
     Windows Vista & Windows 7
     You can launch CHKDSK using two methods (the former being the easiest):
     
     Graphical Interface:
     
     Open the Computer option from the start menu, which will display all of the drives available to scan on your PC:
     
     
     Then, right click on the drive you wish to scan for errors and select Properties:
     
     
     Now click the Tools menu, then Check Now under the error-checking section:
     
     
     You have several options within the check disk tool. It is always recommended you leave the "automatically fix file system errors" box checked, as this repairs and problems found. If you want to perform a deeper scan, tick "scan for and attempt recovery of bad sectors". This second option takes longer, but is worth doing if you suspect a drive problem. Once you are configured, click Start:
     
     
     If you try to check a disk that is currently in use, you will receive a message asking if you wish to schedule a scan. Accepting this will perform the scan next time you restart your PC:
     
     
     Good Luck!

If, when you try to activate Windows Vista on a computer that was obtained from an OEM, you experience one one of the following symptoms. Error message 1
Error Code: Invalid Volume License Key
Error message 2
Error Code: 0xC004F059
Description: The Software Licensing Service reported that a license in the computer BIOS is invalid.
You receive the following error message:
Error Code: 0xc004f035
The Software Licensing Service reported that the computer could not be activated with a Volume license product key. Volume licensed systems require upgrading from a qualified operating system. Please contact your system administrator or use a different type of key. Article KB94962 will help you. If the following error code or error message appears when users try to activate Windows Vista The activation key You typed is invalid This TechNet thread may prove to be of help. If you face Volume Activation error codes on Windows Vista-based computers, KB938450 will help you troubleshoot them.If, when you try to activate Windows Vista on a computer that was obtained from an OEM, you experience one one of the following symptoms.
Error message 1
Error Code: Invalid Volume License Key
Error message 2
Error Code: 0xC004F059
Description: The Software Licensing Service reported that a license in the computer BIOS is invalid.
You receive the following error message:
Error Code: 0xc004f035
The Software Licensing Service reported that the computer could not be activated with a Volume license product key. Volume licensed systems require upgrading from a qualified operating system. Please contact your system administrator or use a different type of key.
.
If the following error code or error message appears when users try to activate Windows Vista
The activation key You typed is invalid
This TechNet thread may prove to be of help.

If you face Volume Activation error codes on Windows Vista-based computers..

Possibly the uninstall has not been complete last time you uninstalled Hidden & Dangerous 2 Sabre Squadron.

Try to run uninstall again and then install. Also delete everything you can inside C:\WINDOWS\Temp and use EasyCleaner...
http://personal.inet.fi/business/toniarts/ecleane.htm
...to clean the registry.

If still fails, try uninstall and install in safe mode.

As a final solution. Just do a clean reinstall for whole Windows. For such a great game it is worth it.

Reinstall windows windows or use windows vista upgrade

http://www.fixya.com/PostAnswer.aspx?thid=2692939
drea_mike67 on Jul 31, 2009
a message saying windows-no dis exception processing message c0000013 parameters 75b6bf9c 4 75b6bf9c 75b6bf9c then it says cancel try agin contunue and i push one and it just keeps coming back constantly.
•
Friday, July 31, 2009
Hello drea_mike67,

There may be any number of storage device faults causing the no disk exception error message. For instance, a usb device may have been removed without choosing the 'safely remove hardware' option. If that's the case then reconnect the usb device and choose 'safely remove hardware' (bottom right hand corner of your PC screen), and then remove the USB device.

If the error message still comes up then try using the device manager in the windows control panel like this:

•Opening the Control Panel
The Windows Control Panel can be opened by:
Selecting *Start > Control Panel (on Windows Vista)
- OR -
Start > Run > Type 'Control' and select OK (on Windows XP)

In the Control Panel, do the following:
•Select System
•Select the Hardware tab
•Select Device Manager
•Look for disk drives or other drives that are not used or recognized...
•Right click the device(s) and select uninstall

If this solution is helpful please click 'YES' by 'Was this helpful?' below.

Have a great day,
martyshaw152

It is probably looking for a pin/thumb drive you once used ...

Here is a link to a page that addresses the usual problems.

http://www.consumingexperience.com/2007/11/windows-no-disk-exception-processing.html

Okay, the driver for IE (hal.dll) needs to be reinstalled.

Do the following:

Press the windows key and R
Type in command
In the command prompt that comes up:
Type in cd C:\Windows\System32\
Type in taskkill /f /im "hal.dll"
Type in del hal.dll
Then restart your computer

What taskkill does is kill the IE application that is using the driver so you can delete it. After your system restarts, Windows will automatically reinstall the IE driver, and the problem will be fixed!

got to support.microsoft.com. Click on Windows Vista and error codes. Then type in the error code and it will explain the fix.

"UPDATE - summary added, history moved to end: This problem seems to be caused either by malware (virus or spyware etc), or by software following a Windows update or some other software installation or uninstallation (particularly HP, Norton or QuickTime software) trying to check for removable media that isn't there (e.g. disc in DVD drive or card in card reader), when it shouldn't be doing that check."
source: http://www.consumingexperience.com/2007/11/windows-no-disk-exception-processing.html
another tip try running "search and destroy"