Dont have remote and cant control channels - Disney Lightning McQueen TV

TV Parts Universal TV Stands DLP Chips ShopJimmy This place might have an original remote control.

try using the volume control slide or the channel selection slide as they are normally the scrol controls

Isn't there a channel Up/Dn button at the front panel of this TV. It should be there. Only Menu button is not. There is Ch up ' Ch Dn and Vol Up ' Vol Dn buttons, beside a power button. Even pressing the channel Up ' Dn button, the channels cannot be changed, check the micro switches inside the TV. Replace them all at one time. You ave to open the TV to access these components.

Dear Sir:

Go to this web: www .fitness.manualsonline.com give your model and download for free the code and user instruction. and Reset your R. C

sincerely. God bless you

ernesto cuadra
managua, nicaragua.

there should be an input button somewhere on the remote. if you dont have the remote, some tv models will toggle through the av inputs at the bottom on the channel numbers. try channel down till to ge to zero then hopefully you will see av. if not you will need to go to the remote. if you dont have remote, you will need to go buy a universal remote.

Unknown password--chassis ITC008 with TV off press and hold volume down on the front of the tv and clear on the remote for 5 seconds
need RCA remote with clear button

Go to the Menu setting, and do a auto channel scan, it will automatically program it to NOT skip 3.

I had that problem 2 my channels disapeared one by one and some will skip yes...

I always use on my remote controll :

1 menu
2 Ch tuning
3 auto

and then wait untill it has found all the channels

DE SEGURO TIENES ALGUN PROBLEMA

how do activate sharp tv to a comcast remote to change the regular channel on he tv im trying to turn to channel 3 but when i turn from the tv it skip from 2 to 5 then so on.