Wifi connection to BT Home Hub problems

1. A TV aerial feed - The BT Vision box gets its digital TV signals over-the-air, so needs a TV aerial. This needs to be connected to the aerial input socket on the V-Box. There is an output RF aerial socket to allow you to connect an aerial feed to a TV if required.
2. SCART lead - You need to make a connection from the Vision+ box to the TV using a SCART lead. If you have a HD TV set, you can also connect via an HDMI lead (not supplied).
3. Connection to Broadband - You'll need to connect from the BT Vision+ box to a BT Broadband connection. This is done using the BT Home Hub. The Home Hub is the Broadband router supplied by BT, and it connects into to your phone line to give you Internet access-The most common way to make the connection, is to connect an Ethernet (networking) cable from the BT Vision+ box to one of the Ethernet ports on the Home Hub. If you can't make a direct connecting to the Home Hub, you can use powerline adapters to make the connection. The self-install kit includes two Powerline adapters to allow you to connect to the Home Hub if it's in a different room to the BT Vision+ Box.
4. The BT Vision v-box has an additional scart socket, which can be connected to a video or dvd recorder.

Delete the connection from your Android device, select your home-hub and enter the password again. If that doesn't work, try restarting both your tablet and your home hub and try again. If you still have no success, changing the type of security the home hub uses can help.

yes, you can. I have my printer connect to my hub and my desktop and I can print from my laptop wirelessly.
You will need your all in one connected via a printer or USB cable to a computer AND also connected to your hub. Then, go to the computer that is connected through a cable to the all in one. Your all in one should have some way to configure its IP address. I have my printer configured as 192.168.1.4 and it's plugged into the 4th port of my hub. Check if this works.

First, Can your 3GS connect on ant other Wi-Fi? If so the issue is specific to configuration on either iPhone or BT Home Hub.
Second, Does BT Home Hub configured for any kind of mac-address security? Check that, if it does either remove it or add the iphone mac-address, you can find the iphone mac address under network setting.
Third, Does Home Hub have limit on number of devices that can connect to it, some do. check that and make sure that you increase the limit or just remove the restriction altogether.
Fourth, IS BT Home Hub Wep enabled? If so the password/key you are entring on your iPhone must be exactlythe same. Or just remove the wep encryption to see if your iphone 3GS can connect.
Fifth, If your old 3G is able to connect to your BT Home Hub, then just make sure you are not FAT fingering the keys and entering a different key.

Try to disable the netgear interface and let windows manage the wifi card. This could also be happening if the signal is not strong enough where the machines are.
Is your wifi hub also a netgear? If not it may not be compatible with the cards if that is the case you will need to replace them with diffrent make of the cards preferably the same brand as hub.

"hi have an archos 5, when trying to connect to wifi, keep getting "wifi error .(0)" or "wifi error .(21), i know i am in a wifi network area as my laptop and palm pda can connect ok, however the archos seems to keep scanning for networks until it eventually switches off, any suggestions would be greatly appreciated"

i have the same problem...PLEASE is there ANYONE who knows how to solve this issue.. my email is [email protected] i need desperate help..

thankyou

go onto the archos website and find the product and watch the tutorials on how to do these thing if you have tried that already then i don't know what is wrong

my touch screen for my archos 605 wifi is not functioning right. How do i resolve this problem?

      Dylan,      I don't know who your ISP provider is, but I am using BT and had to change to a Belkin modem so that I could connect Archos 605 wifi and Palmone.  Had the same problems as you have, which have disappeared on installation of Belkin modem,

                             Samcalm

I had exactly the same problem and solved it myself yesterday after months of phoning/emailing Archos "customer support" - with my set up anyway it was my WEP password on my BT wireless router was wrong, I changed it on my pc to the one that was on the bottom of my hub, made sure that the exact same password was entered on my Archos and I could not believe my eyes when it worked. You need to make sure of course that all the other settings match too, IP address, Gateway and all that other stuff I dont really understand, (nor want to !) Good luck Ulstergirl