Don't have a remote and can't get black square off (PIP?)

How to turn on PIP in Samsung TV SAMSUNG STEP 1. OPENING MENU SETTINGS


Click here to know about PIP in Samsung TV.
a). Press MENU key ( ) from TV remote.



b). Select Picture option and press ENTER key ( ) from TV remote.



c). Select PIP option and press ENTER key ( ) from TV remote control.

STEP 2. TURNING ON PIP SETTINGS

d). PIP window will open on TV screen. Select PIP and press ENTER key ( ) from TV remote control.



e). Select On option and press ENTER key ( ) from TV remote control.



f). Enjoy watching PIP screen.

do u want pip form the cable box itself or watch dvd on one side then tv on other

Hi Caleb,
To resolve this, please perform the following steps:

• Turn off the TV and unplug the power cord
• Connect the HDMI cable to the HDMI port of your laptop.
• Connect the other end of the HDMI cable to the HDMI input on your HDTV
• Connect your device using the HDMI connector (Refer to image below)

• Plug in the power cords for the TV and Xbox
• Turn on your TV and Xbox
• Enter the TV Menu and select Setup (Refer to the image and steps mentioned below)

• To enter the TV Menu, press the Menu button on Remote control
• Use the left and right buttons (volume buttons) to move between the icons

Select correct input source

• Input allows you to select the proper source based on how you have your TV and video equipment connected.
• Press Input on the remote to go directly to the Input Select menu
• Select HDMI 1 or HDMI 2 (Refer to image below)

If the TV does not work, please follow these steps:

Verify the PIP/POP/PBP function is disabled ( PIP/POP/PBP Compatibility - The only input sources that cannot work together are HDMI with HDMI)

• Press the Menu button on the remote control or TV
• Use the Left and Right arrow buttons (Vol +/-) to select PIP/POP/PBP, and then press <Enter>
• Use the Up and Down arrow buttons (Ch Up/Ch Down) to select PIP/POP/PBP/OFF
• Use the Left and Right arrow buttons to select Off

If issue is still persists, please move to the next step

Reset the TV current input to its default configuration

• Press the Menu button on the remote control or TV
• Use the left and right arrow buttons to select Setup, and then press Enter/OK
• Use the Up and Down arrow buttons to select Factory Reset, and then press Enter/OK
• Select Current Input Setting and press Enter/OK
• Re-check the TV functionality

That's a text box not pip. Press the cc button repeatedly on your remote control or go into your menu and find the closed captioning setting. There may not be a menu item for closed captioning. It might be a button on the remote only. You should be able to scroll through the closed captioning options when pressing the cc button to choose off. You are more likely in the text1 or text2 mode right now. If I am wrong and it is pip there should be a pip button that will enable you to turn this feature off (or a menu option). If you need the remote that originally came with this television try http://www.replacementremotes.com/

sounds like you might have PIP turned one (picture in picture) .. if there is no input hooked up for the PIP . you will just get a black screen ... you should be able to move that PIP around and change its size .. indeed turn it off .. look for a menu item called PIP .. select PIP off ..

pls. use remot menu key and open main menu use DW key and select system menu see the PIP option is "ON" set option is"OFF" .
See the PIP screen is clear.

Please make sure that one input is connected to the UHF/VHF port of the TV and other is connected to composite or component ports. If you have connected likewise, please perform the steps below:

1. Ensure the video source is turned on.
2. Ensure the video source is connected to an available VIDEO input jack on the back of the television. IMPORTANT: The VIDEO 5 input cannot be used to view a program in the PIP window.
   
3. On the television remote control, press the TV FUNCTION button.
4. On the television remote control, in the PIP section, press the TV/VIDEO button to select the appropriate video input for the PIP window.
5. If the issue is not resolved, connect the Audio/Video (A/V) cable from the video source to a different VIDEO input jack on the television.
6. On the television remote control, in the PIP section, press the TV/VIDEO button to select the appropriate video input for the PIP window.
7. If the issue is not resolved, replace the A/V cable.

this is probably the closed captioning option, go into the menu and turn off closed captioning, its probably on text....Hopefully this helps

go into your menu and access the closed caption modes. someone has accidently put your tv in the "text" mode. turning off the closed caption feature will correct this.

Go to menu and Reset all Settings